kexcelled ABS Filament 1.75 mm, 3D Printer Filament, Heat Resistance +/ 0.03 1 kg Spool (2.2 lbs), for FDM Printer, White

Dimensionally Stable under Heat: Vicat 98 °C (ISO 306) and HDT 85 °C (ISO 75, 0.45 MPa); for hobbyists, modelers and engineers printing housings, brackets or car phone mounts that hold their shape in a hot car, workshop or garage Tough under Impact: impact strength 35-40 kJ/m² (ISO 179, unnotched) and flexural modulus 2100-2200 MPa (ISO 178), tested at 270 °C nozzle, 90 °C bed and 100 % infill; for clips and spare parts that take a knock during repairs at home or in the office Low Shrinkage: edges pull little and large surfaces stay flat as it cools – for storage boxes, functional parts and large parts printed overnight inside an enclosure and then sanded, drilled and painted Prints on Most FDM Printers: nozzle 240-280 °C, heated bed 80-100 °C with tape or glue, fan 0-50 %, 0.2 mm layer height, walls from 0.8 mm, 200 mm/s as the upper limit; with a 0.4 mm nozzle and through automatic material feed Dry and Ventilate: the filament absorbs moisture, so dry it before printing; in well-ventilated rooms while printing; tuck the filament end into the spool holes after use; RoHS (EU) compliant, REACH-SVHC tested, density 1.05 g/cm³, 1 kg per spool