LANBERG Switch 16X 100MB Poe+/2X 1GB/1X SFP Rack 19 Inch No GESTIONADO Gigabit ETHERNET 250W

Lanberg Rsfe-16p-2c-250 Switch. The Lanberg RSFE-16P-2C-250 is a powerful PoE+ switch designed for robust Ethernet infrastructures. It efficiently delivers data and up to 250W of power to connected devices simultaneously, ideal for home, business, surveillance, and VoIP installations. Key features include intelligent PoE port disconnect to prioritize essential devices, an Extend Mode enabling data and power transmission up to 250m with VLAN separation for extended reach, and 6kV ESD protection to safeguard against electrostatic discharge. This rack-mountable switch offers 16 PoE+ ports, 2 SFP ports, and 1000 Mbps speed, ensuring reliable and safe network operation. EU Plug included. EU Plug.The PoE+ switch is an essential active networking device in any Ethernet infrastructure using power transmission through the structural cabling.RSFE-16P-2C-250 is dedicated to all kinds of installations:home, business, low-voltage, surveillance, IP, VoIP, cable TV networks, and in a particular product can be used in alarm, fire, or access control system.Apart from the switch´s primary function, i.e., supporting Ethernet frame transfer between ports, the device also provides a power supply for each appliance in PoE/PoE+ standard.- 802.3af and at.This means that the switch can supply the devices with a total of up to 250 W.All of this is combined with data transmission at the same time.As a result, such a solution saves resources, space, and time to install a separate electrical and network infrastructure.This is especially important if the network is dispersed and its end-devices do not have direct access to the power source, in particular, when they are mounted outside.Features:Intelligent Poe Port Disconnect:- It is not always clear how switches will behave when the available PoE budget is exceeded.There are several possibilities:the one that exceeds the budget or a random port or the recently connected one will be disconnected.In the last case, what will be their order after a power outage and restoration when all cables are simultaneously connected to the switch?.- Lanberg has introduced an innovative solution in the RS series switches that eliminates all doubts about the mechanics of RJ-45 ports.When the PoE budget is exceeded , the switch will start disconnecting the PoE ports from the highest numbered one until the sum of loads does not exceed the available budget while keeping the remaining ports intact.The port(s) that will be disconnected will remain in this state until the PoE load decreases.- This functionality is primarily dedicated to demanding applications that emphasize safety and continuity of operation, requiring some devices to work continuously regardless of the situation.In such cases, Lanberg switches will help the user to safeguard sensitive devices by connecting them to the port with the lowest number.Extend Mode Up To 250 Meters With Vlan:- By default, the standard switches ensure that the devices can operate at distances of up to 100 m on a single Ethernet cable.However, sometimes, it turns out that a unique solution beyond the standard is required when developing cabling and network structure due to the extensive core network and complex environment.In the case of surveillance systems, this is quite a common problem, resulting from the too-long distance between the distribution device and the end-device.- Lanberg switches have a feature that enables data transmission (max.10 Mbps) and PoE+ power supply up to 250 m on a single cable section with a function of PoE ports separation (VLAN).Just toggle the switch position to „PoE+ Extend 250 m´´ on the housing to ensure the long-distance operation and separation for ports 1 ~ 16.- The solution has been introduced for surveillance, IP, and access control systems, especially if the power equipment is located outside without the possibility of installing additional network distribution points.6 Kv Esd Protection:- The switch itself, as well as the devices connected to it, are repeatedly exposed to various dangers, including electrostatic discharges that can flow through both the power and network cables.- With the safety of both the devices and their users in mind, Lanberg has equipped the switch with an integrated discharge protection system that guarantees 6 kV protection for all ports, effectively reducing their damage due to a surge in voltage.- Under standard conditions, the network operation will continue without interruptions, just like the switch.At the same time, the user gains the safety of the device and infrastructure.Specifications:- Length:208 mm.- Width:320 mm.- Height:45 mm.- Environment temperature:5.- 55 °C.- Environment humidity:0.- 80 %.- Material:Metal.- Work signal:LED.- Type of casing:Rack.- Size:19´´.- Wired standards:IEEE 802.3af PoE, IEEE 802.3at PoE+, IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3x (Flow-Control).- Number of POE ports:16.- Maximum power per port:30 W.- Total budget for PoE:250 W.- Bandwith:7.2 Gbps.- Buffer:4 Mbit.- Cooling:Vents, Passive.- ICT Height:1 U.- Weight:1.9 kg.- Required amount of screws:4.- PoE standards:802.3af, 802.3at.- Specialized:Industrial, Rack.- Weatherproof rating:IP20.- MAC address table:16K.- Maxiumum network link speed:1000 Mbps.- Network Link Type:Ethernet, Fiber.- Number of Ethernet ports:18.- Number of fiber ports:2.- Ports specification:16x 100BASE-T 802.3af / 802.3at PoE+.- PoE power supply type:PoE, PoE+.- Power consumption:250 W.- Power Requirements:100~240V AC.- Connectors:RJ-45, SFP.- Power supply:Mains (230V).Power:250 W.- Number of LAN ports:18.- PoE support:Yes. tradeinn Techinn

Generique Baptisms, Birth and Baby Shower - One Size 166 x 245 x 26