Laser 8063 Oxygen Sensor Socket 1/2"D 22mm

ManoMano

This short series Oxygen sensor socket is used for the removal and installation of Oxygen or Lambda sensors. It features a slot in the side, enabling it to be fitted over the wiring harness, and can be driven by both a 30mm spanner and 1/2""D socketry making it ideal for both difficult access situations or for when increased torque is required to undo tight or seized sensors. Short series - length: 70mm. To fit 22mm single Hex Lambda (oxygen) sensors. The combination of open wrench and 1/2� drive ratchet allows for the application of increased torque. Can be driven by 1/2"" square socketry or 30mm spanner depending on access. Manufactured from chrome molybdenum with black phosphate finish.

Amazon

Short series - length: 75mm To fit 22mm single Hex Lambda (oxygen) sensors The combination of open wrench and 1/2” drive ratchet allows for the application of increased torque Can be driven by 1/2" square socketry or 30mm spanner depending on access Manufactured from chrome molybdenum with black phosphate finish