Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
Press Tool Required - Not Push Fit: This is an M Profile press fit fitting. You need a compatible press gun and the matching M15, M22 or M28 jaw to compress the press end onto the copper tube. The male spigot end inserts directly into another press fitting. Press x Male Spigot Connection: One end is a standard M Profile press socket. The other end is a male spigot that inserts directly into another M Profile press fitting - it does not need pressing itself. This saves one fitting on tight direction changes. Changes Direction by 90 Degrees: Use it wherever you need a right-angle turn and want to reduce the number of fittings in the joint - for example, connecting directly into a tee or coupler without a separate pipe length between them. WRAS, DVGW and BSI Approved: Certified for hot and cold water, vented and unvented heating systems, and chilled water. Rated to 16 bar from -24 deg.C to 110 deg.C. Compatible with BS EN 1057 R250 and R290 copper tube. EPDM O-Ring on the Press End: The press socket end has a black EPDM sealing element. Deburr the pipe end and insert to depth before pressing. The male spigot end seals inside the receiving fitting.