LavaTap 3 in 1 Boiling Water Tap Swan Neck Brass Kitchen Mixer Way Sink Instant Hot Compatible with Under Tank

BOILING, HOT AND COLD FROM ONE TAP: This is a 3-in-1 kitchen tap with a swan neck swivel spout in brushed brass. It gives boiling water at up to 98 °C, plus your everyday hot and cold. One tap does the job of a kettle and a mixer. TAP ONLY. CHECK BEFORE YOU BUY: This listing is the tap. It needs the LavaTap 2.4 L boiling water tank and filter, sold separately or as one pack: the LavaTap tank with filter kit. Want everything in one box? Choose the LavaTap 3-in-1 kit. The tap fits a single 35 mm hole and connects to 1/2" BSP hot and cold supplies with the flexible hoses included. The tank plugs into a 13A socket under the sink. Isolation valves on your supplies are not included. LIFETIME GUARANTEE ON THE TAP BODY, 2 YEARS ON THE FULL KIT: The tap body is covered for life, the cartridge for 10 years and the O-rings for 5 years. Cover runs from installation and is for manufacturing faults in normal domestic use, held by the original buyer. Register within 30 days of installation, using the guarantee card in the box, because your cover is not active until you do. Buy the tap, tank and filter together and every part is covered for at least 2 years. WHAT KEEPS YOUR GUARANTEE VALID: Have it fitted by a qualified installer, with the genuine LavaTap tank, filter and parts throughout. Change the filter every 6 months with a genuine filter, and keep the receipts. Not covered: DIY installation, limescale or frost damage, non-genuine parts or filters, missed filter changes, general wear, and harsh or abrasive cleaning. EASY TO USE: For boiling water, press the button on the left handle, hold it and turn. For hot or cold, turn the right handle. Both handles have a fine fluted grip. You set the boiling temperature anywhere from 45 to 98 °C on the tank. SIZE AND PERFORMANCE: The tap is 365 mm high. Boiling flow is 1.8 L/min and mixed flow is 13.1 L/min, both at 3 bar. It works at 1.5 to 5 bar water pressure (3 bar ideal). If your hot and cold pressures differ, fit a check valve on the hot supply. Clean it with a soft cloth and mild soapy water only.