COMPLETE VALVE, NOT JUST A HEAD: Arrives as the full HP22 set: the HPV22 brass shoe valve body and the HPA2 spring return actuator, with fixing screws and instructions. Nothing else to order. Danfoss code 087N6609. FITS STANDARD 22MM COPPER PIPE: 22 mm external compression on both ports, the size used on most UK heating pipework, with a 110 mm long body. Flow through the two port body can run in either direction to suit the pipe run. SHUTS TIGHT, SERVICEABLE FOR YEARS: Two self cleaning positive shut off shoes seat tightly when the zone is off and resist scale pick up. The head screws onto the body, so if it ever wears out you replace only the HPA2 head, with no draining and no pipework. HOMEOWNER, VALVE SEIZED OR LEAKING? If your engineer says the brass valve body itself has failed, or you are adding a new heating or hot water zone, this replaces body and head in one go. Built for S plan: a pair of 2 port valves gives the radiators and the hot water cylinder independent control, so each zone draws heat only on demand. A manual lever opens it by hand for filling and venting. INSTALLER: SPEC AND COMPATIBILITY: Kv 8.2 m³/h, 10 bar max working, 1.0 bar max differential, 95 °C, 220/240 V 50/60 Hz, 6 W, opens within 35 s, closes within 20 s, IP40. Volt free SPST auxiliary switch 3(1) A; brown live, blue neutral, grey and orange switch, 1 m lead. Danfoss list the head as a direct replacement for Landis and Gyr SK2, Pegler SK2, Sunvic SZ1301 and Potterton PMV2.
Price History
* Price history contains no data from Amazon.
Prices were last updated on: