Lian Li Lancool III RGB Full Tower PC Case Black 4x 140mm Fans Pre Installed Tempered Glass E ATX Support High Airflow

TechInn

Lian Li Lancool Lll Rgb Pc Tower Case. Unleash peak performance with the LIAN LI Lancool III RGB PC tower case. Engineered for extreme airflow, its fine mesh panels and four pre-installed 140mm PWM fans, including three ARGB models, ensure optimal cooling for your high-end components. Enjoy effortless access and a stunning display with all-around hinged tempered glass panels. This spacious midi-tower offers unparalleled flexibility for air, AIO, and custom water-cooling setups, supporting up to ten 120mm fans or a 420mm radiator. With extensive storage options and advanced cable management, the Lancool III provides a premium, organized, and visually captivating foundation for any build. LANCOOL III, the premium mid-tower chassis, offers better thermal performance than LANCOOL II by including 4 pre-installed 140mm PWM fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.Comes equipped with 3x 140mm ARGB PWM fans that have similar performance as the LANCOOL III RGB 140mm back PWM Fan.EXTREME AIRFLOW CRAFTMANSHIP A fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III.HINGED PANELS ALL AROUND The hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives.The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle.The mesh panels located on both sides of the PSU shroud area can be removed for cleaning when the front panel is unattached.FLEXIBLE CONFIGURATION With ample interior room, the LANCOOL III can offer different cooling and usage scenarios AIR Cooling With high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build.AIO Cooling With ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build.The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo.Custom Water Cooling With the ability to support 3 × 360mm radiators simultaneously, the LANCOOL III can offer custom water-cooling enthusiasts, lots of imagination.SPACIOUS COOLING SUPPORT The LANCOOL III is optimized for water-cooling and high-end thermal solutions.A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.Multi-way Front Fan/Radiator Bracket The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.Removable Top Fan Bracket The removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the LANCOOL III by providing enough clearance from the ram.Modular PSU Shroud Bracket - Fan/ Pump/ SSD The adjustable modular PSU shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5 SSDs, or a pump/reservoir combos.Side Multi-Purpose Mounting Slots Mounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.EXTENSIVE STORAGE CAPACITY Multiple storage drive mounting locations are supported for up to 12 x 2.5 SSDs or 4 x 3.5 HDDs and 8 x 2.5 SSDs.COMPREHENSIVE CABLE MANAGEMENT As the second chamber located on the right side is visible, great consideration has been given to cable management.The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.Sliding Cable Routing Cover By slightly loosening the two back thumb screws, the cable cover can be adjusted to fit different sizes of motherboards.REVERSIBLE FRONT I/O Optimized for PC locate on a desk, the front I/O can be relocated to the bottom of the chassis.FRIENDLY PSU INSTALLATION The removable PSU mounting bracket allows for PSU installation outside of the chassis, to then slide it in through from the rear.ANTI-SAG BRACKET FOR PERFECTLY HORIZONTAL GPU A GPU anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels.Lian Li Lancool III.Form factor:Midi Tower,.Type:PC,.Product colour:Black, Transparent.Front fans installed:3x 140 mm,.Front fans diameters supported:120,140 mm,.Rear fans installed:1x 140 mm.Supported HDD sizes:2.5,3.5, SSD form factor:2.5.Width:238 mm,.Depth:526 mm,.Height:523 mm. tradeinn Techinn

Currys

Go all-out on your next build with the modular design and thermals on this Lancool III. There's loads of room inside and incredible adjustability, so you can optimise it for any configuration of air, AIO or water cooling. You can push the boat out to 10 fans or a massive 420 mm radiator. To get you up and running, this comes with four 140 mm fans. You can really get expressive because 3 of them are RGB and there are light mode buttons on the I/O. To admire the lighting and all your fancy components, there are tempered glass panels. If a PC build seems a bit daunting, don't worry. With tons of thoughtful features like slide-through PSU installation, building this up or modifying it is that bit easier for newbies.Good to know- The radiator bracket gives you 4 different ways to mount a radiator or fans and has an easy-to-use latch mechanism- A removable top fan bracket lets you fit beefier fan and radiator combos without intruding on your RAM- You guessed it - the PSU shroud bracket also has incredible adjustability and extra mounting points- Future upgrades are a go because there's room for massive hard drive stacks and clearance for long PSUs- Adding or removing bits and bobs is easy because of the hinged cover doors and handles on the removable tempered glass panels- There are breathable mesh panels, as well as extra space in the chassis to allow for airflow- Because of the sliding cable routing cover, this will work for ATX motherboards all the way up to mega E-ATX ones- Depending on where you put the PC, you can reverse the I/O for better access to your ports- You can add extra kit like dust filter panels and a vertical GPU kit (both sold separately) if your build needs it

Amazon

Supports up to three 360mm radiators and 10 additional fans for extreme air or water cooling Fits GPUs up to 420mm and E-ATX motherboards (under 280mm), with 8 expansion slots 4mm tempered glass side panels, aluminium handles, and advanced cable management design Mount up to 12x 2.5" SSDs or 4x 3.5" HDDs using flexible modular drive locations