Power a group of furniture lights from this Lighteez 36W driver. It provides 24V DC with 4 plug-in light outputs and a separate sensor port, so you can combine cabinet fittings, prepared LED strips and illuminated profiles in one compatible system. One driver for different types of light The driver supplies Lighteez cabinet lights , cut-to-size strips and illuminated profiles . Choose the capacity for the whole group and allow one output for each separately powered light or strip piece. For example, two 1m pieces of 8W/m strip plus two 2.4W cabinet lights total 20.8W and use all four light outputs. Rated capacity and optional spare capacity 36W is the rated total capacity. Loading to around 80%, or 28.8W, is a good-practice recommendation that leaves spare capacity. It is optional: you can use up to 36W across the driver’s outputs. Each light output is limited to 3A, equivalent to 72W at 24V. On smaller drivers the driver’s lower total rating still applies. You cannot combine several driver outputs to power one oversized strip piece. Plan a DIY furniture-lighting installation The driver includes a 1.2m mains lead for the plug-in setup. Place it in a suitable dry, accessible position and measure the routes to your lights before fitting cupboards or shelves. The low-voltage light connectors plug into the driver without stripping wires or soldering. Control the group or use separate drivers Add a Lighteez door, hand-wave, touch or motion control to the separate sensor port. It operates the lights on this driver together and leaves the light outputs available. If areas need separate control, or the project exceeds this driver’s capacity or output count, plan multiple drivers in the Lighteez kit builder . The Lighteez touch dimmer controls the low-voltage lighting using PWM. This does not make the driver suitable for a mains wall dimmer. For joinery, cabinetry and display furniture The same connection system can serve a DIY wardrobe, a cabinet maker’s fitted units or an exhibition display counter. For each job, check the load, socket position and cable reach rather than choosing a driver only by the number of lights. Specifications and what is included Product specifications Rated capacity 36W 80% planning recommendation 28.8W; optional Output 24V DC Mains input 220-240V AC Light outputs 4 Sensor ports 1 Maximum per light output 3A / 72W at 24V, subject to the driver total Included lead 1.2m Length 144mm Width 50mm Depth 18mm
AmazonDelivers a stable 24V DC output at up to 36W, powering multiple Lighteez cabinet lights, cut-to-size LED strips, and illuminated profiles simultaneously from a single driver with flicker-free performance. Features four independent light outputs and a dedicated sensor port, allowing you to add a Lighteez door, hand-wave, touch, or motion control that operates all connected lights together. Supplied with a 1.2m mains lead for a straightforward plug-in setup, with low-voltage light connectors that require no wire-stripping or soldering for a clean, professional installation. Slim 18mm depth and compact 144mm x 50mm footprint allows the driver to sit discreetly in cupboards, cabinets, wardrobes, and display furniture without occupying valuable space. Rated IP20 for indoor use and compatible with the Lighteez PWM touch dimmer, though the driver is not suitable for use with a mains wall dimmer.
Price History
* Price history contains no data from Amazon.
Prices were last updated on: