lilila-ree 2X CPU 8 Pin to 16 Pin(12+4) 12VHPWR PCI-e 5.0 Cable Compatible with GPU 3090Ti RTX 4080 4090 for ASUS/Seasonic/Phanteks Revolt (24 Inches)

POWER YOUR RTX 50/40 SERIES GPU – 600W 12VHPWR OUTPUT This 12VHPWR 2X 8 Pin to 16 Pin power cable converts two 8-pin PCIe outputs on your compatible PSU into a single 16-pin (12+4) 12VHPWR connector. Delivers up to 600W of power to NVIDIA RTX 5090, 5080, 4090, 4080, 4070, and 3090 Ti graphics cards. Ideal for high-performance gaming and workstation builds requiring a compact, high-power GPU cable without an additional 12+4pin adapter. 🔹 COMPATIBLE WITH TYPE-M MODULAR PSUs – 2x 8-Pin Required Designed for modular power supplies equipped with two available 8-pin PCIe/CPU ports. The "Type-M" designation refers to third-party PSU cable compatibility. Compatible with PSUs that provide 2x 8-pin PCIe outputs for 12VHPWR conversion. ⚠️ NOT compatible with PSUs that only have 6-pin PCIe connectors, non-modular PSUs, or PSUs without two available 8-pin ports. The PSU-side connectors are proprietary to specific PSU brands and are NOT cross-compatible. Verify your PSU's port count and type before ordering. 🔹 OPTIMAL CABLE LENGTH – 35cm (13.8in) Cable measures 35cm (13.8in) from the PSU-side 8-pin connectors to the 16-pin GPU connector, providing ideal length for clean cable routing in mid-tower and full-tower cases. Flexible single-sleeve design allows easy bending during installation. 🔹 PLUG & PLAY – KIT INCLUDES & WARRANTY 1x 12VHPWR 2X 8 Pin to 16 Pin Power Cable (35cm, 18AWG). Backed by a 2-year warranty against manufacturing defects. Compatible with NVIDIA RTX 5090, 5080, 4090, 4080, 4070, 3090 Ti, and other GPUs with a 12VHPWR (12+4) port. ⚠️ CRITICAL SAFETY & COMPATIBILITY WARNINGS: This is a GPU power cable, NOT a motherboard or CPU cable. The 16-pin end connects to your GPU's 12VHPWR port; the two 8-pin ends connect to your PSU's PCIe/CPU 8-pin ports. ⚠️ CRITICAL: Fully insert the 16-pin connector until you hear a distinct "click." Incomplete insertion is the #1 cause of overheating and melting. There should be no visible gap between the connector and the GPU socket. ⚠️ Do NOT bend the cable within 3.5cm (1.4in) of the 16-pin connector. Sharp bends at the connector can damage pins and cause poor contact. ⚠️ Do NOT use with additional adapter cables. 18AWG pure copper – ensure good airflow around the cable. For sustained 600W loads, consider a 16AWG cable for additional safety margin. Not compatible with PSUs that only have 6-pin PCIe connectors.