lilila ree for NVIDIA Graphics Card Power Cable 030 0571 000 CPU 8 Pin Male to Dual PCIe Female Adapter Tesla K80/M40/M60/P40/P100 4 inches (2 Pack) (10cm)

Prices from
8.99

Sponsored links

COMPARE ALL WEBSHOPS (2)

Description

Amazon 🔹 FOR NVIDIA TESLA & CMP GPUs WITH EPS (CPU) 8-PIN PORT — NOT PCIe ⚠️ ⚠️ This cable is designed exclusively for NVIDIA Tesla K80/M40/M60/P40/P100 and CMP 170HX professional GPUs that use an EPS (CPU) 8-pin power socket — NOT a PCIe 8-pin socket. ⚠️ Do NOT use this cable with gaming graphics cards or any GPU that uses standard PCIe 8-pin connectors (RTX/GTX/RX series). Using this cable with a PCIe GPU WILL damage your hardware. Check your GPU’s power port before ordering. 🔹 CPU 8-PIN END → GPU EPS SOCKET | DUAL PCIe 8-PIN FEMALE → PSU ⚠️ End---CPU 8-Pin Male--- Connects To--- NVIDIA Tesla/CMP GPU EPS (CPU) 8-pin socket End---2x PCIe 8-Pin Female--- Connects To--- PSU’s two PCIe 8-pin (6+2) cables ⚠️ CRITICAL: Do NOT force a PCIe 8-pin cable into your GPU‘s EPS socket. The keying is different, and forcing it will swap 12V and ground pins on some conductors — damaging your GPU. CMP 170HX documentation explicitly warns: “把 PCIe 线硬插进去会损坏显卡”. Use this adapter to convert your PSU’s PCIe outputs to the correct EPS pinout. ⚠️ CRITICAL: Do NOT force a PCIe 8-pin cable into your GPU‘s EPS socket. The keying is different, and forcing it will swap 12V and ground pins on some conductors — damaging your GPU. Use this adapter to convert your PSU’s PCIe outputs to the correct EPS pinout. 🔹 BOTH PCIe 8-PIN ENDS MUST BE CONNECTED — FOR ADEQUATE POWER ⚠️ ⚠️ Both PCIe 8-pin (6+2) female ends MUST be plugged into your PSU. Using only one end will NOT provide sufficient power for Tesla K80 (300W TGP) or CMP 170HX (250W TGP). The EPS 8-pin connector is rated for 300W. For 150W operation, one branch may suffice; for 300W, both branches are required. 🔹 10CM COMPACT LENGTH — FOR SERVER & WORKSTATION CHASSIS 10cm (4 inch) cable length is designed for the tight internal space of server and workstation chassis. The compact length minimizes cable clutter and ensures clean routing in multi-GPU configurations. 2-pack included — ideal for dual Tesla GPU setups or as a spare. 🔹 FACTORY-TESTED — 1-YEAR WARRANTY Each cable is factory-tested for continuity and correct EPS pinout. Backed by a 1-year warranty against manufacturing defects. ⚠️ Key safety rule: Do NOT use this cable with non-NVIDIA GPUs or GPUs that use standard PCIe 8-pin power connectors. Verify your GPU model and power port type before ordering. ⚠️ IMPORTANT NOTES: NVIDIA Tesla/CMP ONLY. NOT for gaming GPUs or PCIe 8-pin GPUs. CPU 8-pin end → GPU EPS socket. Do NOT force a PCIe cable into the EPS socket. Both PCIe 8-pin ends must be connected for full 300W power delivery. Verify your GPU model against the compatible list before ordering. Turn off PC power and unplug before installation.

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 8.99

£ 8.99

Description (1)

🔹 FOR NVIDIA TESLA & CMP GPUs WITH EPS (CPU) 8-PIN PORT — NOT PCIe ⚠️ ⚠️ This cable is designed exclusively for NVIDIA Tesla K80/M40/M60/P40/P100 and CMP 170HX professional GPUs that use an EPS (CPU) 8-pin power socket — NOT a PCIe 8-pin socket. ⚠️ Do NOT use this cable with gaming graphics cards or any GPU that uses standard PCIe 8-pin connectors (RTX/GTX/RX series). Using this cable with a PCIe GPU WILL damage your hardware. Check your GPU’s power port before ordering. 🔹 CPU 8-PIN END → GPU EPS SOCKET | DUAL PCIe 8-PIN FEMALE → PSU ⚠️ End---CPU 8-Pin Male--- Connects To--- NVIDIA Tesla/CMP GPU EPS (CPU) 8-pin socket End---2x PCIe 8-Pin Female--- Connects To--- PSU’s two PCIe 8-pin (6+2) cables ⚠️ CRITICAL: Do NOT force a PCIe 8-pin cable into your GPU‘s EPS socket. The keying is different, and forcing it will swap 12V and ground pins on some conductors — damaging your GPU. CMP 170HX documentation explicitly warns: “把 PCIe 线硬插进去会损坏显卡”. Use this adapter to convert your PSU’s PCIe outputs to the correct EPS pinout. ⚠️ CRITICAL: Do NOT force a PCIe 8-pin cable into your GPU‘s EPS socket. The keying is different, and forcing it will swap 12V and ground pins on some conductors — damaging your GPU. Use this adapter to convert your PSU’s PCIe outputs to the correct EPS pinout. 🔹 BOTH PCIe 8-PIN ENDS MUST BE CONNECTED — FOR ADEQUATE POWER ⚠️ ⚠️ Both PCIe 8-pin (6+2) female ends MUST be plugged into your PSU. Using only one end will NOT provide sufficient power for Tesla K80 (300W TGP) or CMP 170HX (250W TGP). The EPS 8-pin connector is rated for 300W. For 150W operation, one branch may suffice; for 300W, both branches are required. 🔹 10CM COMPACT LENGTH — FOR SERVER & WORKSTATION CHASSIS 10cm (4 inch) cable length is designed for the tight internal space of server and workstation chassis. The compact length minimizes cable clutter and ensures clean routing in multi-GPU configurations. 2-pack included — ideal for dual Tesla GPU setups or as a spare. 🔹 FACTORY-TESTED — 1-YEAR WARRANTY Each cable is factory-tested for continuity and correct EPS pinout. Backed by a 1-year warranty against manufacturing defects. ⚠️ Key safety rule: Do NOT use this cable with non-NVIDIA GPUs or GPUs that use standard PCIe 8-pin power connectors. Verify your GPU model and power port type before ordering. ⚠️ IMPORTANT NOTES: NVIDIA Tesla/CMP ONLY. NOT for gaming GPUs or PCIe 8-pin GPUs. CPU 8-pin end → GPU EPS socket. Do NOT force a PCIe cable into the EPS socket. Both PCIe 8-pin ends must be connected for full 300W power delivery. Verify your GPU model against the compatible list before ordering. Turn off PC power and unplug before installation.


Product specifications

Brand lilila-ree
EAN
  • 0774388286973
Color
  • Black

Featured Choice
£ 8.99
To Shop