Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
🔹 ⚠️ NOT FOR GPU — FOR MOTHERBOARD CPU POWER ONLY | VERIFY YOUR PSU AND PINOUT This adapter cable converts a PCIe 8-pin female connector to a CPU 8-pin (4+4 detachable) male EPS-12V connector. ⚠️ This cable is designed EXCLUSIVELY for motherboard CPU power — NOT for graphics cards. PCIe and CPU/EPS-12V connectors have DIFFERENT pinout definitions. Connecting this cable to a GPU will BURN or DAMAGE the GPU and we are not responsible for damage caused by incorrect use. Please verify your PSU's PCIe output and your motherboard's EPS-12V requirement before ordering. 🔹 PCIe 8 PIN FEMALE → CPU 8 PIN (4+4 DETACHABLE) MALE — EPS-12V CONVERSION PCIe 8-pin female end plugs into your ATX power supply's PCIe 8-pin output port. CPU 8-pin (4+4 detachable) male end plugs into your motherboard's EPS-12V CPU power connector. The detachable 4+4 design allows you to use it as a full EPS 8-pin or a P4 4-pin depending on your motherboard's CPU power connector. Ideal for dual-CPU workstations and server motherboards requiring additional EPS-12V power. 🔹 18AWG WIRE GAUGE — STABLE POWER DELIVERY Built with 1007-18AWG tin-coated copper wire for stable power delivery. ⚠️ Important: Some high-end PSUs have dedicated PCIe output rails with sense pins for overcurrent protection. CPU/EPS cables do not have sense pins, so this adapter may bypass certain PSU protection features. If your PSU has a dedicated CPU/EPS output available, use that instead of this adapter. Maximum power: 235W (EPS-12V 8-pin standard). 🔹 34CM (13.3 INCH) LENGTH — FLEXIBLE CABLE ROUTING 34cm (approximately 13.3 inches) length provides enough reach for clean cable routing in most desktop and workstation cases. Compared with shorter 10cm/15cm adapters, this length offers more flexibility for routing around components and reaching the motherboard's EPS-12V connector. Braided PET sleeve protects the cable and ensures durability. 🔹 COMPATIBILITY — DUAL CPU WORKSTATION, SERVER MOTHERBOARD, MINING RIG Compatible with motherboards that have an 8-pin or 4+4 pin EPS-12V CPU power connector and power supplies that have an available PCIe 8-pin output port. Ideal for dual-CPU workstations, server motherboards (such as ASUS Z10PE-D8 and similar), mining rigs, and any build where the PSU lacks a dedicated CPU 8-pin cable. ⚠️ NOT compatible with GPUs. ⚠️ Verify your PSU's PCIe output can safely provide the required CPU power. ⚠️ CRITICAL SAFETY WARNINGS: ⚠️ NOT for GPU. Connecting to a graphics card's PCIe port will BURN or DAMAGE the GPU. ⚠️ PCIe and CPU/EPS-12V have DIFFERENT pinouts. Do not assume they are interchangeable. ⚠️ If your PSU has a dedicated CPU/EPS 8-pin cable, USE THAT INSTEAD. This adapter is a last resort when no CPU cable is available. ⚠️ Verify your PSU's PCIe output rail can handle CPU power requirements. Some PSUs have separate rails for PCIe and CPU. ⚠️ Maximum power: 235W (EPS-12V 8-pin standard). Do not exceed this rating. ⚠️ Power off and unplug the PSU before installation. Align connectors correctly — do not force.