M-SURE MS-542-150 Dual Hook Digital Depth Gauge 0150mm / 06" ±0.03mm Accuracy 0.01mm Resolution Internal Groove & Step Measurement 100mm Base Stainless Steel Cabled Data Output

±0.03mm Accuracy | 150mm Dual Hook Digital Depth Gauge: The MS-542-150 delivers ±0.03mm accuracy across its full 0–150mm (0–6") measuring range at 0.01mm (0.0005") resolution. The dual hook end enables measurement of internal grooves, internal steps, and lip thickness from a shared surface datum. Important: add the hook thickness to the displayed reading when measuring from the datum surface, as specified in the user manual and catalogue instructions for this instrument Stainless Steel, Hardened and Ground | 100mm Base | Thumb Roller: The MS-542-150 is constructed from stainless steel with a hardened and ground base and frame. The 100mm base length provides stable positioning, and a thumb roller gives precise slider control. Type 1 cabled data output is compatible with the M-SURE MS-601-010 USB Data Interface (up to 8 readings per second, no PC driver required) and the MS-620-001 Remote Display for direct measurement capture Cabled Data Output | Auto Wake | Storage Case Included: Standard functions include Inch/Metric Conversion, Auto Wake (activates on movement), Auto Power Off, Zero Reset, On/Off, and Low Battery Alert. Type 1 cabled data output is compatible with the M-SURE MS-601-010 USB Data Interface and MS-620-001 Remote Display. Powered by CR2032 battery. Supplied with protective storage case, battery, and user manual M-SURE Precision Instruments | UK-Based Technical Support: M-SURE is a precision metrology brand with over 10 years' experience supplying industrial measuring instruments across engineering, manufacturing, and quality control sectors. UK-based technical support and genuine spare parts available. Compatible accessories: MS-601-010 USB Data Interface, MS-620-001 Remote Display Dual Hook for Internal Groove & Lip Thickness Measurement: The MS-542-150 uses a dual hook design to locate in internal grooves and measure groove or lip thickness from the same reference datum. This enables precise measurement of internal steps, recesses, grooves, and lip features on engineering components where a standard flat-probe depth gauge cannot reach or locate correctly. Both hooks contact the reference surface simultaneously for a consistent datum reference Engineering and Manufacturing Applications: Designed for precision measurement tasks in quality control, engineering workshops, and manufacturing environments where accurate depth and groove measurements are required for component inspection and verification