Magigoo The 3D printing adhesive Large Format

TechInn

Magigoo Orginal 120ml 3d Printing Adhesive. Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of first non-sticky layer (warping).This is the most common problem in 3D printing for manufacturing with FFF / FDM technology. Product features of Magigoo adhesive :.Pen with adhesive makes your 3D prints stick to the surface easily.Reduces warping to a minimum.Save time, filament & nerves All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address ´the first layer not sticking problem´.Magigoo ensures a strong adhesion to the hot plate.But the magic starts when printing is ready:just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping.Isn´t it magic? Regardless of you being a hobbyist or professional - it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled. Over 100 applications.ABS, PLA, PETG, HIPS, ASA, TPU.Easy application.Easy release.Easy clean.No smell.Non-toxic.No additional tools needed.Easy to transport.Nicer print finish.Main Features.Easy application:applying Magigoo is as easy as child´s play.Shake, press, apply.Spread on an active printing area only.No need to cover the whole surface.Easy-release:Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled. Easy-clean:Magigoo is easily cleaned with water. Long-lasting:Magigoo last for 100+ average prints. Odorless and safe:Magigoo is safe to use - be it in a closed room or educational workshop with kids. Important note :The applicator has an active spring valve, which activates when applicator is pressed against the build plate.Please do not press the bottle as ´´ketchup bottle´´ , otherwise the applicator may pop off.Bottle may be slightly squeezed, only when the nib is pressed against the bed and it may be necessary only if bigger flow is required.Bottle must not be squeezed when cap is off any other time as it may result in glue popping out of the bottle. tradeinn Techinn

Amazon

Applying on large surfaces is easy. Cover specific area or whole bed, print with or without rafts. Thin layer requires no levelling adjustment. Can compensate errors in levelling or print settings Save time and effort. Once print is cooled it literally detaches itself. Maggio can act as a good release agent. It's specially useful in cases of excess adhesion on any surface Its easy to clean with damp cloth. Should first layer be still stuck, a few drops of water will detach print safely. Maggio will not clog your nozzle or damage your printer or printer bed

123-3D UK

The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.