MaJoCompTec Watertwin Fuel Cap with Water Connection, Tank Cap, Filling Adapter for Filler Nozzle, Motorhome Caravan Accessories (Pro Version Filter + Starter Set, 3 PIN D: 78

Prices from
26.48

Featured

COMPARE ALL WEBSHOPS (1)

Description

Amazon WATERTWIN-PRO: suitable for filler neck whose fuel cap has 3 locking pins and an outer diameter of 78mm. Please check before ordering – there are different sizes Connection with system: with this water filling aid, you can be sure that your filling hose stays where it should go - at the tank connection! No more annoying fixing of the filling hose necessary - no nasty surprises when the hose falls out of the water filler neck to the ground and comes loose CLEAN SOLUTION: the water filters of the WATERTWIN-PRO series filter dirt particles, suspended matter and impurities from a particle size of 0.15 mm from the water. For cleaning, the coarse dirt filter is rinsed with water from the opposite side and is therefore always ready for use without disassembly. Our tip: with a cotton swab, stubborn dirt can be easily removed Perfect control: by removing the included Aqua-Stop coupling, the water supply can be interrupted at any time - easy, safe and fast! Thanks to the ½" standard plug-in system, the included components can be freely combined and can be supplemented at any time according to your needs Integrated double coupling: after completing the filling process, the two connections of the water hose are attached to the integrated double coupling. The tank hose is now closed - residual water can flow into your vehicle and no vermin can get in Easy to use: Watertwin-PRO water tank adapter only slightly tighten/put on - the adapter does not snap into place. Insert the tank adapter with the overflow so that it is in the upper area. With strongly curved filler nozzles, it can cause backflow when filling with a strong water jet, which allows the water to escape from the overflow. In this case, plug the supplied short hose piece onto the internal connection or reduce the water supply From camper for campers: all our adapters can be found here (enter in the search field) – made in Germany – from camper for campers by MaJoCompTec Box contents: 1 x MaJoCompTec WATERTWIN-PRO adapter for water tank cap 3-pin D: 78, 1 x coarse dirt filter, 1 x twin connection, 1 x short hose extension, 1 x hose coupling ½ inch, 1 x hose coupling ½ inch with water stop, 1 x tap connection ½ inch, 1 x tap connection 1 inch with reduction ¾ inch, 1 x note sticker, accessory set as selected. Please note: Thanks to the durable flat surface, the WATERTWIN does not require a rubber seal

Compare webshops (1)

Shop
Price
£ 26.48
Description (1)

WATERTWIN-PRO: suitable for filler neck whose fuel cap has 3 locking pins and an outer diameter of 78mm. Please check before ordering – there are different sizes Connection with system: with this water filling aid, you can be sure that your filling hose stays where it should go - at the tank connection! No more annoying fixing of the filling hose necessary - no nasty surprises when the hose falls out of the water filler neck to the ground and comes loose CLEAN SOLUTION: the water filters of the WATERTWIN-PRO series filter dirt particles, suspended matter and impurities from a particle size of 0.15 mm from the water. For cleaning, the coarse dirt filter is rinsed with water from the opposite side and is therefore always ready for use without disassembly. Our tip: with a cotton swab, stubborn dirt can be easily removed Perfect control: by removing the included Aqua-Stop coupling, the water supply can be interrupted at any time - easy, safe and fast! Thanks to the ½" standard plug-in system, the included components can be freely combined and can be supplemented at any time according to your needs Integrated double coupling: after completing the filling process, the two connections of the water hose are attached to the integrated double coupling. The tank hose is now closed - residual water can flow into your vehicle and no vermin can get in Easy to use: Watertwin-PRO water tank adapter only slightly tighten/put on - the adapter does not snap into place. Insert the tank adapter with the overflow so that it is in the upper area. With strongly curved filler nozzles, it can cause backflow when filling with a strong water jet, which allows the water to escape from the overflow. In this case, plug the supplied short hose piece onto the internal connection or reduce the water supply From camper for campers: all our adapters can be found here (enter in the search field) – made in Germany – from camper for campers by MaJoCompTec Box contents: 1 x MaJoCompTec WATERTWIN-PRO adapter for water tank cap 3-pin D: 78, 1 x coarse dirt filter, 1 x twin connection, 1 x short hose extension, 1 x hose coupling ½ inch, 1 x hose coupling ½ inch with water stop, 1 x tap connection ½ inch, 1 x tap connection 1 inch with reduction ¾ inch, 1 x note sticker, accessory set as selected. Please note: Thanks to the durable flat surface, the WATERTWIN does not require a rubber seal


Product specifications

Brand MaJoCompTec
EAN
  • 0802022288097
Color
  • Pro version + filter + starter kit

Featured Choice
£ 26.48
To Shop