Makita DHR243Z 18V Li ion LXT 24mm SDS Plus Rotary Hammer Batteries and Charger Not Included

Power Tools Direct

The Makita DHR243 SDS Plus 3-Mode Hammer Drill has an efficient brushless DC motor and a quick-change drill chuck. The easy-to-grip handle has been ergonomically designed to give maximum power thrust and a sure comfortable grip in any operation; overhead application drilling with palm-up or palm-down grip.The tool body is separated into the upper and lower housings at the foot of the handle portion where the houses are jointed with vibration absorbing cushion rubbers. Unique rubber joint construction suppresses the transmission of vibration to battery terminals minimising battery failures such as terminal breakage or poor electrical contact. There are 3 modes of operation: rotation and hammering hammering only and rotation only. Specifications: No Load Speed: 0-950/min.Impact Rate: 0-4 700/bpm.Impact Energy: 2.0 joules.Capacity: Concrete 24mm Steel 13mm Wood 27mm.Weight: 3.3kg. All vibration figures quoted are Tri-axial to EN 60745 2006. Vibration: Drilling: 3.5 m/sec²Vibration K Factor: 1.5 m/sec²Vibration: Hammer Drilling: 13.5 m/sec² Vibration: Chiselling: 10.5 m/sec²The Makita DHR243Z SDS Plus 3-Mode Hammer Drill is supplied as a Bare Unit - No Battery or Charger.PTDMAKDHR243Z

ManoMano

General description The MAKITA DHR243Z is an 18V 3-function hammer drill designed for demanding jobs. It features a brushless motor that enhances efficiency and productivity. This versatile tool offers three working modes: drilling for wood and metal, drilling with hammer action for stone and concrete, and hammering for small demolition tasks. The ergonomic soft grip handle ensures comfort and control during operation. Technical specifications No Load Speed: 0-950/min Impact Rate: 0-4,700/bpm Impact Energy: 2.0 joules Capacity: Concrete 24mm, Steel 13mm, Wood 27mm Weight: 3.3kg Vibration (Drilling): 3.5 m/sec² (K Factor: 1.5 m/sec²) Vibration (Hammer Drilling): 13.5 m/sec² Vibration (Chiselling): 10.5 m/sec² Compatibility and accessories Compatible with DX01 and DX02 suction adapters Quick change chuck for easy bit changes Installation Tool body features a unique rubber joint construction to minimize vibration transmission Safety clutch protects the motor from accidental bit

Amazon

Easy-to-grip handle ergonomically designed to: Give maximum power thrust, provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip One touch slide chuck for SDS-plus bit The tool body is separated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers Distinctive rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures such as terminal breakage or poor electrical contact, Weight: 7.495716908 pounds, Manufacturer: Makita