Mcbazel 3 in 1 Ratchet Drill Chuck Key Wrench with 2 Sets Sockets, Universal Ratcheting Spanner, Replacement Tool for Drill, Compatible Most Electric Drills and Power Tools

THREE KEY HEAD SIZES IN ONE WRENCH - Covers 1.5-10mm, 1.5-13mm and 3-16mm keyed chucks, so one wrench replaces the loose keys scattered across a workshop. The pinion teeth are carbon steel and the handle is moulded plastic with a ribbed anti-slip grip, sized 15 x 2.4 x 1.1cm to sit in a toolbox drawer or apron pocket. TWO-WAY RATCHET - NO REPOSITIONING - A forward and reverse switch lets you tighten or loosen with a short rocking swing of the handle, instead of lifting the key out and refitting it every quarter turn. That keeps one hand free to hold the drill steady and cuts the wrist strain of repeated bit changes on a pillar drill. MAGNETIC QUICK-CHANGE HEADS - Each head snaps onto the drive by magnet as soon as it is aligned, so swapping between the three sizes is tool-free and the head does not drop into the swarf tray. The magnet also holds the head on the wrench between jobs, which is where most loose chuck keys go missing. SIX HEADS - TWO FULL SETS - Includes two 10mm, two 13mm and two 16mm ratchet key heads, so a worn or mislaid head has an immediate spare rather than idling the drill. Head heights are 2.2cm, 2.5cm and 2.8cm with pin diameters of 5mm, 6mm and 7mm respectively. CHECK YOUR CHUCK FIRST - PLEASE READ - This fits keyed chucks only, not keyless hand-tightened chucks. Two conditions must both be met: the chuck clamping range is 10, 13 or 16mm, and the key hole in the chuck body accepts the pin. Measure the hole before ordering. In the box: 1 ratchet wrench and 6 ratchet key heads.