Mcbazel Under Desk Mount for PS5/PS4 Controller, PS4 Controller Holder Compatible with Controller,PS5 Black

NO DRILL TAPE MOUNTING: Two 3M VHB pads come pre-fitted on the back of this controller holder, so you wipe the underside of the desk clean, peel the red liners and press the plate flat onto a smooth glass or metal surface. Leave it for at least 8 hours before you hang a pad on it, because the tape reaches full strength only after that wait. SCREW OPTION FOR WOODEN DESKS: One screw comes in the box for wooden desktops, and the keyhole slot moulded into the centre of the holder plate drops over the screw head, so a wooden desktop is held by the screw and the tape together. The printed manual shows both routes, tape for glass and metal and the screw for wood, so you can match the method to the desk you actually own. FREES UP THE DESK SURFACE: This under desk holder measures 9 x 3.9 x 1.3 cm and parks the controller in the dead space beneath the desktop, so the keyboard, mouse and monitor keep the top of the desk to themselves. The slim plate stays close to the underside and the pad hangs within arm's reach, so you collect it by reaching down instead of clearing space first. SMOOTH GROOVES CRADLE THE STICKS: Two moulded grooves take the two analogue sticks, and their rounded edges stop the pad sliding out of the holder or being scuffed while it hangs. Store the controller switched off, because a controller left on rests its sticks in the grooves and that resting pressure can change the input the console reads. ONE HOLDER, ONE CONTROLLER: The pack contains one holder, one screw and one manual, and the two grooves are cut for the stick spacing on controllers for PS5 DualSense and for PS4 DualShock 4. A gamepad for Xbox Series X, for Xbox One or for Nintendo Switch Pro sits differently in the grooves and is not covered, a headset does not hang on this holder, and no controller is included.