£ 9.89
MechPort 2 Pcs Pin Treadmill Speed Sensor Cable 110cm Fit for Most Treadmills
Prices from
9.89
Sponsored links
|
|
£ 9.89 |
To Shop
|
| COMPARE ALL WEBSHOPS (1) | ||
Description
Amazon
This product is a treadmill speed sensor that uses magnetic induction technology and is an ideal repair accessory for replacing worn or faulty original sensors. This sensor is widely compatible with most brands of treadmills, and can be used as long as the interface matches. Before purchasing, please confirm whether the original cable plug is consistent with it. If it is consistent, you can purchase with confidence. Its core function is to monitor the speed of the front drum and transmit the signal to the control board to ensure accurate display of speed on the treadmill. When the motor stops after a few seconds of starting and an error code appears, it usually indicates a sensor malfunction, which can be restored to normal operation after replacement. The key parameters include a cable length of 110 centimeters (approximately 43.3 inches), a 2-pin interface design, and two types of sensor ends available: circular head and flat head, suitable for standard treadmill control systems. During installation, it is necessary to first disconnect the power supply and remove the motor cover. Disconnect the original sensor from the motherboard, remove the old sensor, and install the new sensor in the same position. Ensure that there is a gap of about 2-3 millimeters between the sensor and the drum magnet before fixing it.
Compare webshops (1)
Sponsored links · Some shops pay us a fee
Sort by:
Shops with other sizes
Description
(1)
This product is a treadmill speed sensor that uses magnetic induction technology and is an ideal repair accessory for replacing worn or faulty original sensors. This sensor is widely compatible with most brands of treadmills, and can be used as long as the interface matches. Before purchasing, please confirm whether the original cable plug is consistent with it. If it is consistent, you can purchase with confidence. Its core function is to monitor the speed of the front drum and transmit the signal to the control board to ensure accurate display of speed on the treadmill. When the motor stops after a few seconds of starting and an error code appears, it usually indicates a sensor malfunction, which can be restored to normal operation after replacement. The key parameters include a cable length of 110 centimeters (approximately 43.3 inches), a 2-pin interface design, and two types of sensor ends available: circular head and flat head, suitable for standard treadmill control systems. During installation, it is necessary to first disconnect the power supply and remove the motor cover. Disconnect the original sensor from the motherboard, remove the old sensor, and install the new sensor in the same position. Ensure that there is a gap of about 2-3 millimeters between the sensor and the drum magnet before fixing it.
Product specifications
Related results
Featured Choice
£ 9.89
