Motul RADIATOR LEAK SEALER

Radiator leak sealant for cooling system radiators. Sealing additive to be added to cooling systems. For all liquid cooled cooling systems. MOTUL SELLA RADIATOR LEAK SEALER is designed for use in radiators and closed cooling circuits (with expansion bottle) of all diesel and petrol engines, both naturally aspirated and turbocharged, with or without catalytic converter and with any type of fuel. MOTUL SEALS RADIATOR LEAKS effectively seals small pores and coolant leaks that could cause major problems. This product acts quickly and effectively in all types of closed, liquid-cooled cooling systems. MOTUL SEALS RADIATOR LEAKS can be used to seal water radiators and heat exchangers, leaks in water pumps, valves, loose connections and cracked coolant hoses, without causing blockages in the cooling system. Recommended for use in passenger cars and commercial vehicles as well as industrial heat exchangers. Can be used as a preventive or immediate action treatment. Compatible with all types of coolants (non-organic, hybrid, Lobrid and OAT). Provides perfect lubrication during the sealing process of the coolant circuit. PERFORMANCE | MOTUL SEALS LEAKS RADIATOR, added to the engine cooling circuit, allows: Sealing small pores and leaks of great importance without obstructing the cooling system. Improve the performance of valves, thermostats and water pumps. Improve control of engine temperatures. RECOMMENDATIONS : Check coolant level. Add MOTUL RADIATOR LEAK SEALER to the coolant in the cooling system expansion tank, warm. Set all heater controls to the "warm" position. Let the engine idle for approximately 10 minutes. Recheck the coolant level and check whether the seal has been applied effectively. Caution: When opening the cap of the expansion bottle, open it slowly and carefully, as the system is pressurised and hot and there is a risk of burns. A dosage of 300 ml is sufficient for cooling systems up to 12 l capacity. Never exceed the recommended proportion.