Noctua NF A14 iPPC 2000, Heavy Duty Cooling Fan, 3 Pin, 2000 RPM (140mm, Black)

Noctua Nf-a14 Ippc-2000 140 Mm Fan. Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the NF-A14 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the NF-A14 design and the use of a novel three-phase motor, the industrialPPC version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the NF-A14 industrialPPC suitable for operation in challenging environments, the renowned SSO2 bearing technology guarantees an MTTF of over 150.000hrs. Topped off with Noctua's trusted reliability and the NF-A14 industrialPPC is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability. Specifications:- Size: 140x140x25 mm- Mounting hole spacing: 124,5x124,5 mm- Connector & pin-configuration: 4-pin PWM- Cable length: 40cm- Bearing: SSO2- Blade geometry: A-Series with Flow Acceleration Channels- Frame technology: AAO- Material: Fibre-glass reinforced polyamide- Ingress protection: IP52- Motor type: Three-phase- Rotational speed (+/- 10%): 2000 RPM- Min. rotational speed 20% PWM (+/-20%): 500 RPM- Airflow: 182,5 m³/h- Acoustical noise: 31,5 dB(A)- Static pressure: 4,18 mm H₂O- Input power (max.): 2,16 W- Max. input current: 0,18 A- Operating voltage: 12 V- MTTF: > 150.000 hScope of delivery:- Fan- 4 Fan ScrewsTechnology:2000rpm industrialPPC version:- Thanks to its elevated 2000rpm top speed, the NF-A14 industrialPPC-2000 provides a significant performance boost over the 1500rpm retail version. Combined with the industrialPPC series´ robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications.Three-phase motor design:- While most axial fans use single-phase motors with 4 slots, Noctu´s industrialPPC fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.Class-leading energy efficiency:- While the standard NF-A14 is one of the most energy efficient 1500rpm 140mm fans on the market, the industrialPPC version´s three-phase motor provides a further 10% reduction in power consumption when compared at 2000rpm.Fibre-glass reinforced polyamide construction:- Both the impeller and the frame of Noctua's industrialPPC fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°C and makes the fans even more robust and break-proof than Noctua's standard fibre-glass reinforced PBT fans.Certified IP52 water- and dust protection:- Thanks to a special varnish coating that covers the motor and PCB, the NF-A14 industrialPPC complies with the ingress protection rating IP52. This means that it is not only highly dust resistant but also withstands dripping water equivalent to 3mm rainfall per minute.Flow Acceleration Channels:- The NF-A14 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.AAO frame:- Noctu´s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctu´s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan´s performance/noise efficiency.Stepped Inlet Design:- Noctu´s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.Inner Surface Microstructures:- With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.Integrated anti-vibration pads:- Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.SSO2 Bearing:- The NF-A14 industrialPPC features the further optimised second generation of Noctu´s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.Metal bearing shell:- In order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the NF-A14 industrialPPC sports a CNC milled bearing shell made entirely from brass.Custom-designed PWM IC with SCD:- Supporting fully automatic PWM speed control, the NF-A14 industrialPPC uses Noctu´s custom-designed NE-FD2 PWM IC for three-phase motors. The NE-FD2 integrates Noctu´s proprietary Smooth Commutation Drive (SCD) technology, which suppresses PWM switching noises and thus makes the fan quieter at lower speeds. tradeinn Techinn

Heavy duty cooling fan, 140x140x25 mm, 12V, 3-pin Molex, max. 2000 RPM, max. 31.5 dB(A), >150,000 h MTTF Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency 12V 2000rpm model (31.5dB) with 3-pin connector High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection