Nsssunnre MAt-10 Automatic Antenna Tuner 1.8-54MHz 0.1-30W for FT-817/818 QRP Radio

4.The tuner can work within the range of 1.8MHz to 54MHz, at power levels up to 30 watts. It tune dipoles, verticals, Yagis, or virtually any coax-fed antenna. It match an amazing range of antennas and impedances, far some other tuners you may have considered, including the built-in tuners on many transceivers. 1.The mAT-10 is a compact and exquisite tuner designed for FT-817/818, it can also be used in other QRP transceivers. When it is connected to FT-817/818 through a dedicated data cable mAT-, it is a dedicated tuner, which can achieve convenient "one-key tuning". If no data cable is used, it is a universal QRP tuner for all low-power transceivers. 3.When mAT-10 is used in other QRP transceivers, it does not need data cables and work only by connecting RF cables. The tuning process can be completed by pressing the Multi-function key on the panel. It is easy to operate. 2.The mAT-10 is connected to the ACC port of the FT-817/818 transceiver through data cable mAT-. The ACC interface allows an external device such as a PC or the mAT-10 to control the FT-817/818 by sending it serial commands. The mAT-10 has the function of "one key tuning". 5.The mAT-10 has 16,000 frequency memories. When tuning on or near a previously tuned frequency, the mAT-10 uses "Memory Tune" to recall the previous tuning parameters in a fraction of a second. If no memorized settings are available, the tuner runs a full tuning cycle, storing the parameters for memory recall on subsequent tuning cycles on that frequency. In this manner, the mAT-10 "learns" as it is used, adapting to the bands and frequencies as it goes.