NT Labs Pond Foamclear, Foam Control Water Treatment, Breaks Down Froth, Controls Excess Protein in Water, Helps Maintain the Correct pH 500ml

Amazon

【REMOVES FOAM】: Use when you have a build-up of unsightly foam and froth on the surface of your pond which is due to an excess of protein in the water. Foamclear will breakdown the froth, allowing good gas exchange between the water and air and helping to maintain the correct pH. 【 EASY TO USE 】 : To work out the required dosage for your pond, simply calculate the volume of your pond in litres (length x width x depth (in cm)/1000) or alternatively, use our Online Dosage Calculator. Shake bottle well, mix the correct dose in a clean bucket of pond water, and then pour evenly around the pond. 【 USE IN NATURAL, ORNAMENT AL AND KOI PONDS 】 : NT Labs Foamclear is suitable for use in all types of outdoor pond. This is a vital piece of kit for every pond owner, from beginners to those with more experience in caring for pond fish 【 UNLIMITED USAGE 】 : You can use this product as and when you need to. The thing to bare in mind is that the build-up of foam will be happening as a result of an excess of protein in the water, if this is a one-off event then it’s probably not too much to worry about and a one-off dose of Foam Control sh ould solve the problem. If the build-up of foam becomes a more regular occurrence, then it may indicate that there is an underlying issue such as the filter is not coping with the amount of waste being produced by the fish in which case you may need to loo k at the amount of food being fed or possibly increasing the frequency and amount of partial water changes on the pond. 【 USE WITH NT LABS MATURE – LIVE FILTER BACTERIA 】 : If there is a lot of foam constantly present, check the efficiency of the biological filtration system using NT Labs Ammonia and Nitrite Test Kits, and reduce the amount of food fed. Also add Mature to boost the activity of the filter system, and perform a partial water change.

Cazaar

NT Labs Pond FoamClear Foam Control 250/500/1000ml When you have a build-up of unsightly foam and froth on the surface of your pond which is due to an excess of protein in the water. Foamclear will breakdown the froth, allowing good gas exchange between the water and air and helping to maintain the correct pH.Available in250ml - treats 4550 litres500ml - treats 9100 litres1000ml - treats 18200 litresDirectionsMix the correct dose in a clean bucket of pond water, add gradually, pouring evenly around the pond.If there is a lot of foam constantly present, check the efficiency of the biological filtration system using PondLab Ammonia Test and Nitrite Test kits, and reduce the amount of food fed. Also add Mature to boost the activity of the filter system, and perform a partial water change. Breaks down unsightly pond surface froth Helps maintain good pH levels Easy use - simply pour evenly around pond Completely fish, wildlife & pet safe