NUPROL Power 11.1v LiPo 3300mAh 3S Deans [Rate 30C @ 99A] [Burst 60C 198A] Nunchuck

STATS - LiPo | 11.1v | 3300 mAh | 30C/60C @ 99A/198A (Cont/Burst) - Airsoft AEGs use the "Burst" flow rate to start the motor, and then the "Cont" flow rate to provide continuous discharge (check your owners manual to ensure the battery purchased meets the minimum flow rate (C) of your AEG) - this battery provides approximately 2 minutes of continuous discharge before running flat LITHIUM POLYMER - LiPo batteries have an excellent size/weight to capacity ratio, allowing you to fire more shots with a smaller battery. LiPo batteries can be recharged at any charge level without damaging the overall capacity of the battery. LiPo batteries should not be "run-flat", as this can damage the battery and effect overall charge ability. LiPo batteries MUST be charged with a LiPo Balance Charger. LiPo batteries should always be charge in a fire-retardant Safe-Charging-Bag NUNCHUCK - this battery is split to help find its place in small battery compartments. Commonly fitted inside the buttstock of rear wired Airsoft Replicas where the buffer tube is not hollow (example EBB - Electric-Blow-Back AEGs). Also for fitting around the barrel, within the handguard of front wired Airsoft Replicas. Always check the dimensions of the battery vs the battery compartment to ensure compatability DEANS (T) - this battery is suitable for Airsoft Replicas using a Deans (T) battery connector QUALITY CONTROL - NP Power batteries are produced at an ISO 9000 Quality Control accredited manufacturing plant and shipped at an optimal charge rate of ≥60% to protect against degradation when in transport/ storage