ODSUPPLIES - 22mm x 3/4 Inch Solder Ring Straight Tap Connector

IMPORTANT SIZING NOTE - Most plumbing products are measured using BSP thread dimensions which measure 1/4 inch larger than that stated, therefore these 3/4 Inch and 1/2 Inch BSP threads actually measures 1 Inch and 3/4 Inch in diameter respectively. If your threads measure 3/4 Inch and 1/2 Inch in diameter then you require the 1/2 Inch and 1/4 Inch version of this product This listing is for a Pack of 1 To solder an end feed fitting, clean and flux the joint, assemble it, heat the copper evenly with a blowtorch until it reaches melting temperature, and apply solder wire to the socket edge so capillary action draws the molten metal into the gap around the entire pipe. To prepare copper pipe for solder ring fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. WRAS Approved