omni Meshtastic 868MHz LoRa antenna N male with IPEX/u.fl Cable 9dBi outdoor fiberglass U.FL to female pigtail for Helium, RAK, Meshtastic. IP67.

Prices from
15.99

Sponsored links

COMPARE ALL WEBSHOPS (1)

Description

Amazon 🔹 N MALE CONNECTOR — NOT SMA | VERIFY YOUR DEVICE PORT BEFORE ORDERING ⚠️ This antenna uses a standard N Male connector — NOT SMA. ⚠️ N-type and SMA are completely different connector types and are NOT interchangeable. N-type is larger, more robust, and provides superior weather sealing — the industry standard for outdoor RF equipment. If your device uses SMA ports, you need an SMA-to-N adapter (not included). Please check your device's antenna port before ordering. 🔹 9dBi HIGH GAIN — 868MHz EU868 FIBERGLASS OUTDOOR ANTENNA 9dBi high gain omnidirectional fiberglass antenna delivers consistent 360° coverage. Optimized for the 863-870MHz EU868 band — covering LoRaWAN, Helium hotspot mining, Meshtastic EU868, WiFi HaLow (IEEE 802.11ah), and other sub-1GHz ISM applications. 50 Ohm impedance, VSWR ≤ 1.5. ⚠️ 9dBi antennas have a flatter radiation pattern — best suited for open areas and elevated installations. 🔹 IP67 FIBERGLASS — WEATHERPROOF & UV-RESISTANT FOR OUTDOOR USE IP67-rated fiberglass radome withstands rain, snow, dust, and harsh outdoor conditions. UV-resistant fiberglass material prevents degradation from prolonged sun exposure. Designed for permanent outdoor installation on poles, masts, or building exteriors. Operating temperature: -40°C to +85°C. Includes mounting bracket for pole or wall installation. 🔹 U.FL / IPEX MHF1 TO N FEMALE PIGTAIL INCLUDED — WIDE COMPATIBILITY Includes 1x U.FL (IPEX MHF1) to N Female pigtail cable for direct connection to development boards with IPEX sockets. ⚠️ This cable uses IPEX MHF1 (compatible with Hirose U.FL) — NOT MHF4. MHF4 is smaller and used on some RAK modules (RAK11720 MHF4 variant). Please verify your device's IPEX connector type before ordering. 🔹 WIDE COMPATIBILITY — HELIUM, RAK, BOBCAT, NEBRA, MESHTASTIC, HaLow GATEWAY Compatible with devices using N Female antenna ports: Helium hotspot miners (RAK, Bobcat, Nebra, SenseCAP, SyncroBit), LoRaWAN gateways, Meshtastic outdoor nodes, WiFi HaLow (802.11ah) access points, and other 868MHz LoRa modules. ⚠️ Verify your device's connector before ordering — SMA ports require an adapter. ⚠️ IMPORTANT NOTES: N Male only — NOT SMA. Verify your device's connector before ordering. 868MHz EU868 only — verify your device's frequency band before ordering. This is a passive antenna — it does not amplify or boost signal power. 9dBi antennas have a flatter radiation pattern — for best results, mount as high as possible in open areas. Signal improvement depends on terrain, obstacles, and antenna height. Use low-loss coaxial cable (LMR-400 or equivalent) for the best performance. For outdoor permanent installation, apply waterproof tape to the N connector junction. ⚠️ EU_868 must comply with 10% duty cycle limit and 25 mW ERP per ETSI EN 300 220.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

£ 15.99

Description (1)

🔹 N MALE CONNECTOR — NOT SMA | VERIFY YOUR DEVICE PORT BEFORE ORDERING ⚠️ This antenna uses a standard N Male connector — NOT SMA. ⚠️ N-type and SMA are completely different connector types and are NOT interchangeable. N-type is larger, more robust, and provides superior weather sealing — the industry standard for outdoor RF equipment. If your device uses SMA ports, you need an SMA-to-N adapter (not included). Please check your device's antenna port before ordering. 🔹 9dBi HIGH GAIN — 868MHz EU868 FIBERGLASS OUTDOOR ANTENNA 9dBi high gain omnidirectional fiberglass antenna delivers consistent 360° coverage. Optimized for the 863-870MHz EU868 band — covering LoRaWAN, Helium hotspot mining, Meshtastic EU868, WiFi HaLow (IEEE 802.11ah), and other sub-1GHz ISM applications. 50 Ohm impedance, VSWR ≤ 1.5. ⚠️ 9dBi antennas have a flatter radiation pattern — best suited for open areas and elevated installations. 🔹 IP67 FIBERGLASS — WEATHERPROOF & UV-RESISTANT FOR OUTDOOR USE IP67-rated fiberglass radome withstands rain, snow, dust, and harsh outdoor conditions. UV-resistant fiberglass material prevents degradation from prolonged sun exposure. Designed for permanent outdoor installation on poles, masts, or building exteriors. Operating temperature: -40°C to +85°C. Includes mounting bracket for pole or wall installation. 🔹 U.FL / IPEX MHF1 TO N FEMALE PIGTAIL INCLUDED — WIDE COMPATIBILITY Includes 1x U.FL (IPEX MHF1) to N Female pigtail cable for direct connection to development boards with IPEX sockets. ⚠️ This cable uses IPEX MHF1 (compatible with Hirose U.FL) — NOT MHF4. MHF4 is smaller and used on some RAK modules (RAK11720 MHF4 variant). Please verify your device's IPEX connector type before ordering. 🔹 WIDE COMPATIBILITY — HELIUM, RAK, BOBCAT, NEBRA, MESHTASTIC, HaLow GATEWAY Compatible with devices using N Female antenna ports: Helium hotspot miners (RAK, Bobcat, Nebra, SenseCAP, SyncroBit), LoRaWAN gateways, Meshtastic outdoor nodes, WiFi HaLow (802.11ah) access points, and other 868MHz LoRa modules. ⚠️ Verify your device's connector before ordering — SMA ports require an adapter. ⚠️ IMPORTANT NOTES: N Male only — NOT SMA. Verify your device's connector before ordering. 868MHz EU868 only — verify your device's frequency band before ordering. This is a passive antenna — it does not amplify or boost signal power. 9dBi antennas have a flatter radiation pattern — for best results, mount as high as possible in open areas. Signal improvement depends on terrain, obstacles, and antenna height. Use low-loss coaxial cable (LMR-400 or equivalent) for the best performance. For outdoor permanent installation, apply waterproof tape to the N connector junction. ⚠️ EU_868 must comply with 10% duty cycle limit and 25 mW ERP per ETSI EN 300 220.


Product specifications

Brand TREADALT-TEC
EAN
  • 0710946490598

Featured Choice
£ 15.99
To Shop