Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
Latte Print with a Single Top Button: Powder sits in the chamber and the card slides in underneath. Set the body level over the cup, press the gold button once, and the powder falls through the cut-outs in an even layer. Nothing to charge and nothing to switch on. Both sides of a card give two latte prints, so the pattern changes without buying anything else. 3D Printed Latte Art Camera with a Retro Body: Most latte art printers are plain boxes. This one is printed layer by layer, so thin ridges run across the sides and catch the light. A gold knurled ring sits on the front, with a small square viewfinder shape above it. On a shelf it reads as a film camera. It takes no photographs, and the powder does the printing. Coffee Stencil Machine with a Card Slot at the Base: A card slides into the front slot from underneath, with the tab left showing so it pulls out easily. The back of the body holds a small stack, so the cards you are not using stay with the machine instead of in a drawer. Many coffee printer machines need a lid opened to swap a card. Here the slot is on the outside, so it takes a moment: pull one out, push another in. Latte Art with Cocoa and Cinnamon: Fill the chamber with a fine dry powder. Cocoa gives a dark line, cinnamon a warmer tone, and hot chocolate works on the same foam. The cut-outs hold their shape more cleanly on a settled surface, so give the cup a moment before you press. Powder is not included. The same coffee art printer works on a dessert, so one card covers both courses. Latte Printer for Cappuccino and Hot Chocolate: The body measures 10 x 10 cm (3.9 in), so it sits beside the kettle without crowding the counter. It suits the foam on a cappuccino, a latte or a mug of hot chocolate, and the same press works on a dessert before it goes to the table. Coffee art printers and latte printers come in all sizes; at ten centimetres square this one fits where the cups are.