Pancontrol Test Adapter For Type 2 Wallbox Stations With Ac Charging

Pancontrol Test Adapter For Type 2 Wallbox Stations With Ac Charging Blue . Ensure the safety and functionality of Type 2 AC charging stations with the PANCONTROL Test Adapter. This professional tool simulates an electric vehicle, enabling comprehensive testing of wallboxes and public charging stations without an EV. Manually cycle through charging states, simulate critical faults like earth faults and short circuits, and verify phase indication with three LEDs. An integrated Schuko socket allows for external load connection up to 10A for advanced power analysis. Ideal for electricians, technicians, and inspectors, this IP54 rated, CAT III 600V adapter offers rigorous field use and comes with a protective case. PANCONTROL Test Adapter for Type 2 Wallbox & AC Charging StationsCategory: HardwareSubcategory: Measurement ToolsAttributes: AdaptersEnsure the safety, functionality, and compliance of e-mobility infrastructure with the PANCONTROL Test Adapter for Type 2 AC charging stations. As the electric vehicle market continues to grow, the demand for reliable and secure charging points is critical. This professional-grade test adapter is an indispensable tool for electricians, installation technicians, maintenance engineers, and safety inspectors tasked with commissioning, servicing, and verifying Type 2 wallboxes and public AC charging stations.The PANCONTROL adapter empowers you to perform comprehensive functional tests by expertly simulating the presence of an electric vehicle. This allows for a complete and realistic evaluation of the charging station´s behavior without needing an actual EV on-site, dramatically improving efficiency and simplifying diagnostic procedures. By verifying every aspect of the charging process, you can confidently sign off on installations and repairs, ensuring they meet stringent industry standards and guarantee end-user safety.Designed for rigorous field use, this device allows for in-depth analysis of the charging sequence. You can manually cycle through all charging states to confirm the station responds correctly at each phase of operation. Further enhance your safety verification by simulating critical fault conditions, such as an earth fault or a short circuit on the control lines, to ensure the station's protective mechanisms are functioning perfectly. The clear, three-LED phase indication provides an immediate visual confirmation of power presence and correct wiring, preventing errors and speeding up troubleshooting. For complete system validation, an integrated Schuko socket enables the connection of an external load to verify power delivery and perform advanced measurements with additional equipment.Main Features:* Advanced Electric Vehicle Simulation: Accurately mimics an electric vehicle connection to enable full functional testing of Type 2 wallboxes and AC charging stations.* Comprehensive Charging State Analysis: Allows for the manual selection of charging states (A, B, C, D) according to the IEC 61851-1 standard for complete sequence verification.* Safety Fault Simulation: Proactively tests the charging station's response to critical faults, including earth faults and short circuits on the communication pilot line, to confirm safety cut-off mechanisms.* Charging Current Simulation: Simulates various charging current capabilities to test the communication and load management of the charging station.* Instant Phase Indication: Equipped with three bright LEDs for immediate visual confirmation of the presence and sequence of all three phases.* Protective Earth Testing: Includes a dedicated function to perform a preliminary check on the effectiveness of the protective earth conductor.* Communication Line Verification: Enables testing of the Control Pilot (CP) communication line to ensure proper data exchange between the simulated vehicle and the station.* External Load Connection: Features an integrated Schuko socket, allowing for the connection of external measurement instruments or loads up to 10A for comprehensive power analysis.Technical Specifications:* Primary Function: Adapter for testing Type 2 wallboxes and AC charging stations in e-mobility.* Simulation Standard: Simulates an electric vehicle according to IEC 62196-2.* Charging State Control: Selectable charging states A, B, C, D as per IEC 61851-1 standard.* Visual Indicators: Three LEDs for clear three-phase indication.* Safety Testing: Protective Earth (PE) test, Earth Fault (PE) simulation, and Control Pilot (CP) short circuit simulation.* Communication Test: Verifies the communication line between the EV and the charging station.* External Load Outlet: Schuko socket for connecting external 10A loads.* Protection Rating: IP54, providing robust protection against dust and water splashes.* Safety Category: CAT III 600 V, ensuring high protection for the user.* Portability: Includes a durable storage case for secure transport and on-site protection.* Dimensions: 210x110 x 55 mm. tradeinn Bricoinn