PARKVISION Wired Reversing Camera Kit 12V 140 adjustable lens, metal housing, 6m video cable, RCA, parking lines, mirror flip, ip68 weather proof

Fits Most Vehicles​ - 140° wide angle coverage reversing camera for car​ with a slim metal housing that mounts to the licence plate, so it sits neatly behind the plate and doesn't trash the bodywork. Works as a rear view reverse camera​ on most cars, 4×4s and vans with a 12V system​. Check the dimension drawing in the photos before ordering — two minutes with a ruler saves a return Wired for Stable Picture – 6m Video Cable & RCA Included​ - This is a wired reverse camera, so you get a steadier image than most wireless kits (no drop-outs as you reverse). The box includes the reversing camera​ body, parts, and a 6 m (20 ft) video cable​ to reach your dashboard head unit . Run the cable with the reverse-light feed, tuck it behind trim, and you're done — no mystery signal loss, no "no signal" panic at the lights Adjustable Lens with 140° Wide View Angle - The fully adjustable metal lens housing​ rotates so you can set the viewing angle​ exactly where you need it — down far enough to see the bumper/curb, not so high you're filming the sky. The wide angle lens​ improves rear coverage when you're reversing​ into tight bays, supermarket spaces, or narrow driveways, and helps with parallel parking by reducing what's hidden by the boot / tailgate​ and rear pillars Rain, Spray & Freezing Temps — ​Built with a zinc alloy (metal) body​ and proper seals for waterproofing, this rear view camera​ is made for British weather​ — not just a sunny afternoon. The result is a cleaner image over time because the lens area stays sealed and the housing doesn't go chalky or crack like cheap plastics Parking Guidelines & Mirror/Normal Image Switches, No Menus​ - Use the inline switch leads​ to turn the parking guidelines / parking lines ON or OFF, and flip between Mirror mode​ (standard for reversing) and Normal mode​ if you ever re-purpose it. Restart the power (pop the reverse light off/on) to apply. Keep the install tidy: red wire → reverse light +12V, black → chassis ground, and stick to the supplied cable set​ to avoid flicker or "no signal" issues