Peatys x Chris King MK2 Tubeless Valves

Blacks

With design, sustainability & quality running right to the core, there's only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike.Instructions:Remove valve cap, o-ring and lock nut.Insert valve through valve hole in rim.Push the o-ring onto valve stem.Thread the lock nut onto valve stem.Hand tighten lock nut until firm.Screw on valve cap.

Amazon

Made from one piece CNC aluminum, the new Peaty's tubeless valves in collaboration with CHRIS KING fit most tubeless tubeless rims, including carbon, enduro and DH rims. The large aluminium and soft rubber base create a perfect air seal on Presta valve holes up to 8 mm in diameter, with laser engraved logos, in addition to being ergonomic and beautiful, the caps have two functions one allows you to easily unscrew the valve shells and the other turns into a radius wrench. Made from high strength 7075 CNC aluminum, Peaty's Tubeless MK2 valves fit most tubeless road mountain bike and cyclocross configurations including carbon, enduro and DH rims. Our unique X-Cut base has been designed to work with all tire inserts. Cut channels in the valve base allow air and preventative fluid to pass through when the inserts are pushed against them. Unlike most other valve compatible with inserts, our valves have a "straight" design so there is no reduction in sealant or air flow when tire inserts are not in use. Easy installation Integrated O-rings prevent rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders for cyclists. Our valves come with a built-in valve cap and a spoke key cap (for standard 3.4mm spokes). This makes it easier to tighten loose rays and recondition with preventative, whether in the workshop or on the trail. Length 80 mm / Colour: Purple