PNI Echo One Microphone HP 6500 7120 with Mode and Programmable Beep Signal

Pni Echo One Cb Radio Station Microphone. Elevate your CB radio experience with the PNI Echo One microphone. This accessory enhances your PNI Escort HP 6500/7120/6550 CB stations with a captivating echo effect and personalized roger beep. Create a unique audio signature by uploading your own MP3 or WAV files (up to 1.5 seconds) for the roger beep, distinguishing your transmissions. Fine-tune the echo length and repetition rate with easy-to-use potentiometers. Its robust RJ11 connector ensures broad compatibility, even with other CB radios featuring a 5V output on PIN 4. Make your voice unforgettable and your broadcasts unmistakable. Microphone for CB PNI HP 6500 and HP 7120 CB stations with programmable echo and roger beep modeEcho mode and roger beep pre-installed:The echo and roger beep module pre-installed in the microphone has the following main functions:- Echo: Generating the echo effect of the signal captured by the radio station´s microphone and inserting it into the modulation stage- Roger beep: Generate a custom signal (via MP3 audio file) at the end of the broadcast and maintain it.Custom Roger Beep Effect:- Plug a USB cable into the micro USB jack on the microphone´s internal board and into a computer and copy the custom audio file (MP3 or WAV, maximum duration 1.5 seconds) as instructed in the manual.As a result, at the end of each broadcast, you will also transmit the personalized audio signal that will be received by the other CB users as an end-of-broadcast warning.Compatibility:- The PNI Echo One microphone is compatible with PNI Escort HP 6500, PNI Escort HP 7120, PNI Escort HP 6550 CB radio stations, and any CB station with an RJ11 connector with a 5V output voltage on PIN 4.Add these two new functions to your station and you will make the difference: your received voice will be distinguished from the others by the echo effect, and the end of your broadcast will be marked by an original audio signal.Echo Settings:- Echo adjustments can be made through the 2 potentiometers on the microphone board, with the help of a ceramic screwdriver.Adjustment 1: Here you can adjust the echo length. Modify and test closely until you get the desired result. Setting 2: here you can adjust the number of repetitions of the echo per second. Modify and test repeatedly until you get the desired result.Connect to your computer and copy custom audio:- To write another sound (beep of maximum 1.5 seconds) in MP3 or WAV format, you need to connect the microphone via a micro USB-USB cable to the laptop (computer) and activate the power switch (the ´´Open´´ position).In a few seconds, the laptop will find the xx MB memory, then by copying transfer the file to the module´s memory. Remember to switch the module switch back to the original working position.Specifications:General:- Connector Type: RJ11- Channel change buttons: Yes- Compatible stations: PNI Escort HP 6500, PNI Escort HP 7120, PNI Escort HP 6550- Dimensions: 50 x 75 x 30 mm- Operating temperature: -26°C ~ +80°C- Cable length: 80-100 cmIn the box:- CB radio station microphone: Yes- Echo mode and roger beep: Yes, pre-installed. tradeinn Techinn

Connect a USB cable to the micro-USB socket of the microphone's internal board and to a computer and copy the custom audio file (MP3 or WAV, maximum duration of 1.5 seconds) according to the instructions in the manual. The PNI Echo One microphone is compatible with CB PNI Escort HP 6500, PNI Escort HP 7120, PNI Escort HP 6550 and any CB station with an RJ11 connector with an output voltage of 5V over PIN 4. The echo settings can be done using the 2 potentiometers on the microphone board using a small ceramic screwdriver. Don't forget to put the module switch back to the original working position.