PNI GD-01 sensor, with audible and light warning, compatible V-02 solenoid valve

Pni Gd-01 Gas Detector. Gas detector:- The PNI GD-01 gas sensor detects several types of gas: LPG, natural gas and coal gas with an alarm concentration of at least 25% LEL (Lower Explosive Limit).Compatible with PNI V-02 gas solenoid valve:- If the detector detects a gas leak, the red LED will light up and the siren will sound continuously. If the detector is connected to a solenoid valve, it will send a pulse to it which will stop the gas supply. The gas detector will return to its initial operating state after dispersing the gas or restarting the detector. The PNI GD-01 gas sensor is compatible with the PNI V-02, 3/4 ´´solenoid valve.Audible / light warning:- In the event of an alarm, the gas detector warns both audibly (prolonged sharp sound with an intensity of at least 70dB) and light (red light constantly lit throughout the alarm period). In the normal operating state, only the green LED remains lit. In the sensor priming state, the red LED flashes for approximately 180 seconds.Specifications:- Supply voltage: 230 VAC- Operating temperature: -25 - +60 degrees C- Types of gas detected: Natural gas, LPG, coal gas- Alarm point: 20% LEL ((Lower Explosive Limit))- Output power: less than 1.7 W- Command output: 12 V (NO circuit)- size: 110 x 73 x 41 mm- Weight: 221 g- Alarm sound level: ≥ 70dB / m- Heating time: up to 180 sec.- Gas detector: Yes- User manual: Yes. tradeinn Techinn

If the detector detects a loss, the red LED will light and the siren will sound continuously. If the detector is connected to a solenoid valve, it will transmit to it a pulse that will cause the supply to stop. The detector will return to its initial operating state after the gas has dispersed or after the detector has been restarted. The PNI GD-01 sensor is compatible with the PNI V-02, 3/4 "solenoid valve. In case of alarm, the detector warns both audible (prolonged sharp sound with an intensity of at least 70dB) and bright (red light constantly lit throughout the alarm period). In the normal operating state, only the green LED remains lit. In the sensor priming state, the red LED flashes for approximately 180 seconds.