Polymaker Fiberon PA6 CF20 Filament 1.75mm Black 0.5 kg

【Fiberon by Polymaker】- A new product family of Polymaker dedicated to democratizing high-performance composite materials. It offers cost-effective composite 3D printing filament especially optimized for high-speed printing. With superior printability and high printer compatibility, it enables high-performance parts on most mainstream printers, including entry-level printers 【Stiff & Strong & Heat Resistant】 - Polymaker Fiberon PA6-CF nylon filament 1.75mm is made of 80% PA and 20% chopped carbon fibers. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion (Heat Deflection Temperature (ISO 75 0.45 MPa): 215℃) 【Wide Application】 - Fiberon PA6-CF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, fixtures, drone frame, prosthetics or handles 【Tangle ************************************************************* & Resealable Bag】 - Fiberon PA6-CF nylon filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use 【Cardboard Spool with Enhanced Hard Edge】 - Fiberon filament comes in upgraded packaging, featuring an enhanced coating on the edge and a fully recycled cardboard spool and box. The hard edge not only prevents the dust from fraying cardboard but also protects the edge from deformation and delamination. 【Printing Settings】 - Nozzle: 280-300˚C; Bed: 40-50˚C; Speed: Up to 300mm/s. 【Note】 - It is important to have an abrasion resistant nozzle since there is carbon fiber inside this Nylon filament.

Polymaker Fiberon PA6-CF20 filament is nylon6 reinforced with carbon fibers. This gives it improved stiffness, strength and heat resistance, without sacrificing interlayer adhesion. This product is black, 1.75mm and comes on a 0.5 kg spool.Please note: We recommend using a wear resistant nozzle, such as a hardened steel nozzle.