Power Hack BAHCO HSS

Bahco Steel 6 Dpp High Speed Machine Saw Blade For Kasto Machines 450x38x2 Mm. 6 TPI HSS Power Hacksaw Blade for KASTO machines 450 mm x 38 mm x 2 mm.Designed with holes for KASTO machines.- Designed for cutting almost any material.- High speed steel hacksaw blade.- Suitable for use on modern machines with skilled operators and a high degree of control.- Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade.- If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs.- Excessive tension causes high stresses in the blade and saw frame.- As a general rule, harder materials call for a lower stroke rate and higher feed pressure.- If the chips are burnt, feed pressure is too high.- If tooth cracks appear, feed pressure is too high.- Fine, powdery chips indicate that feed pressure is too low.- Fine curled chips indicate the optimal feed pressure.- The teeth should not be touching the workpiece when the machine is started.- A useful rule of thumb is that at least three teeth should be engaged at any time. tradeinn Bricoinn

Designed with holes for KASTO machines | If the tension is too low, the blade will bend upwards or twist, causing overload, increased blade wear and an uneven, crooked cut | Fine or powdery swarf indicates that the feed pressure is too low Designed for cutting most materials | Excessive tension causes overloading of the blade and the saw frame | Fine, curly swarf indicates optimum feed pressure High-speed steel machine saw blade | As a general rule, harder materials require a lower travel rate and greater feed pressure | The teeth must not touch the workpiece when the machine is running Suitable for modern machines with trained operators and a high degree of control | If the chips are burnt, the feed pressure is too high | A useful general rule is to have at least three teeth in contact at all times Correct blade tension is essential to ensure a straight cut and a long blade life | If cracks form in the teeth, the feed pressure is too high