Power Walker Powerwalker Vfi 2000 Licr Iot Pf1 Online Ups

Power Walker Powerwalker Vfi 2000 Licr Iot Pf1 Online Ups Silver One Size / EU Plug 220V. The PowerWalker VFI 2000 LICR IoT PF1 Online UPS delivers industry-leading reliability with its output power factor of 1 and advanced Level 3 LFP lithium battery system. Enjoy extended backup time with up to 4 hot-swappable battery modules and a compact 2U UPS + 1U EBM design. This next-generation UPS features built-in cloud connectivity for intuitive remote monitoring via an app, offering a lower Total Cost of Ownership than traditional lead-acid batteries. Its robust BMS ensures safety, performance, and extended battery life through intelligent SOC/SOH management and multi-level protection. EU Plug.Features:- Output power factor 1 - Industry-leading BMS reliability - Built-in cloud connection - Up to 4 hot-swappable battery modules - Lower TCO (Total Cost of Ownership) than lead-acid battery - Compact 2U UPS + 1U EBM design - LFP lithium battery system with advanced BMS - Long backup time with up to 4 optional EBM cabinets - The PowerWalker VFI 1000-3000 LICR IoT series is the next generation of UPS and offers an intuitive app for remote monitoring via the cloud.The UPS features Level 3 LFP (lithium ferrophosphate or lithium iron phosphate - LiFePO 4) battery system with advanced BMS features:Level 1 - Safety:- Internal balancing and protection for battery cell & pack - The battery is certificated according to safety standards of UN 38.3, UL 1973, UL 1642, IEC 62619, and IEC 62133 Level 2 - Functionality & Performance:- SOC and SOH management for keeping the battery life longer and the cost lower - The compact design of the lithium battery saves space - Advanced internal cell / pack / EBM balancing and protection ensures backup time and battery life - Long backup time with up to 4 EBMs - Auto-detection for easy configuration - auto addressing up to 4 EBMs Level 3 - System synchronization with UPS:- Pre-alarm.SOC and SOH prediction - Multi-level protection in cell and battery pack level to ensure safety and reliability Specifications:General Features:- Type:Online Single Phase (VFI) - Phases (IN-OUT):1-1 - Form Factor:Rack, Tower - Rack Units [U]:2U - Power Capacity:2000VA / 2000W - Output Power Factor:1 Input:- Input Voltage Range:110 - 300 V - Max THDi:≤5% - Frequency Range:45 - 55 Hz / 54 - 66 Hz - Frequency (Synchronized Range):45Hz - 55Hz or 54Hz - 66Hz load>60% Output:- Waveform:Pure Sine Wave - Nominal Output Voltage:200/208/220/230/240 VAC - THDv:≤1% 100% linear load, ≤5% 100% non-linear load - Voltage Regulation (Battery Mode):±1% - Frequency (Battery Mode):±0.2Hz Input & Output Connectors:- Input Connector:C14 - Output Type:IEC - IEC C13:8 Technical Details:- LINE Mode Efficiency [%] (Full Load):93.0 - Transfer Time (AC / Line Mode to Battery Mode) [ms]:0ms - Transfer Time (ECO Mode to AC / Line Mode or Battery Mode) [ms]:10ms - Transfer Time (Line Mode or Battery Mode to Bypass Mode) [ms]:4ms - Load Crest Ratio:3:1 - Additional Features:CVCF Mode Available, Potential Equalization Screw, Hot-Swappable Batteries, OBM - Optimized Battery Management, LCD Display, Unity Power Factor 1.0, Battery Pack Available, IoT - Cloud Connectivity, Generator Compatible, EPO - Emergency Power Off, Programmable Segment Available, HID - Human Interface Device, EBM - External Battery Module - Auto Detection - IEC 62040-3 classification:VFI-SS-111 Batteries And Autonomy:- Batteries:1x 76.0V/9.0Ah - DC Voltage:1x 76.0V - Full Load Backup Time [min]:10.0 - Half Load Backup Time [min]:20.0 - External Battery Pack:Yes - Compatible Battery Type:Lithium Batteries - Nominal DC Voltage [V]:76.8 Communication:- Communication:Dry contact, RS-232, WLAN Port - for Internet Connection, Management Card Slot, RJ-45 - for Internet Connection - Software:WinPower Environment:- Noise Level:< 40dB - Fan Logic:Always on, Automatic Speed Control - Temperature:0°C - 40°C - Humidity:0% - 95% RH (non-condensing) - IP:IP 20 . tradeinn Techinn