Waveshare

Pre soldered Raspberry Pi Pico 2 Microcontroller Board Based on RP2350 Chip, with Dual core and architecture Design, Running up to 150 MHz (with Header)

Name: Pre soldered Raspberry Pi Pico 2 Microcontroller Board Based on RP2350 Chip, with Dual core and architecture Design, Running up to 150 MHz (with Header)
Brand: Waveshare
SKU: 05ca4494bf987c15201bd3f3203fc779

1/1

Image of Pre soldered Raspberry Pi Pico 2 Microcontroller Board Based on RP2350 Chip, with Dual core and architecture Design, Running up to 150 MHz (with Header)

Amazon Marketplace

Prices from

11.96

Description

Amazon Pico 2 RP2350 microcontroller board with pre-soldered header, based on Raspberry Pi's own RP2350 microcontroller chip, adopts dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz Pre-soldered Raspberry Pi Pico 2 microcontroller embedded 520KB of SRAM, and 4MB of on-board Flash memory, as well as 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 24 × controllable PWM channels USB 1.1 with device and host support, low-power sleep and dormant modes, drag-and-drop programming using mass storage over USB, Temperature sensor Castellated module allows soldering direct to carrier boards, 12 × Programmable I/O (PIO) state machines for custom peripheral support For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, complete online development resources and tutorials to help you get started easily. Feel free to contact us for more information

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 11.96

Description (1)

Pico 2 RP2350 microcontroller board with pre-soldered header, based on Raspberry Pi's own RP2350 microcontroller chip, adopts dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz Pre-soldered Raspberry Pi Pico 2 microcontroller embedded 520KB of SRAM, and 4MB of on-board Flash memory, as well as 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 24 × controllable PWM channels USB 1.1 with device and host support, low-power sleep and dormant modes, drag-and-drop programming using mass storage over USB, Temperature sensor Castellated module allows soldering direct to carrier boards, 12 × Programmable I/O (PIO) state machines for custom peripheral support For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, complete online development resources and tutorials to help you get started easily. Feel free to contact us for more information