PrecisionGeek M10 x 1.25mm Stainless Brake Banjo Bolts 22mm Length Hex Head with 4x Copper Washers Set of 2 for Motorcycle, Automotive, Hydraulic Systems

📏 Thread M10 x 1.25, length under head 22 mm, flanged hex head, which increases the bearing surface on the washer. 🔧 For banjo fittings on brake calipers, brake and clutch master cylinders and fuel and oil lines of motorcycles and cars. Check the thread and length of the original bolt before ordering. ⚪ Stainless steel, CNC turned from solid bar stock, with central bore and cross bore for the fluid flow. 📦 Contents: 2 banjo bolts and 4 copper washers, two per bolt. ⚠️ The brake system is a safety component: installation should be carried out by a qualified person, with new copper washers and the tightening torque prescribed by the manufacturer; then bleed the system and check for leaks. Made in the EU by PrecisionGeek in Poland. 🧩 Other versions: the same part is also available in further variants (size, material, colour or pack quantity); choose the combination you need from the variant list on this page. 📐 Before ordering: compare thread size, pitch and length with the original part or the vehicle documentation; brake parts must match exactly. 🔧 Installation tip: clean the sealing faces before fitting and check the connection for leaks after the first ride or drive.