PrecisionGeek M8 10mm dia Black Aluminium Speaker Spikes Set of 4

📏 DIMENSIONS AND PACK: Cone diameter 10 mm, cone length 20 mm, M8 external thread 10 mm long, total length of the spike 30 mm. 4 spikes per pack, enough for one speaker, rack or stand with four feet. Pads and cups are not included. 🔩 ALUMINIUM 7075, CNC MACHINED: Each spike is precision machined from 7075 aluminium alloy. The alloy offers a very good ratio of strength to weight, so the spikes are light but still strong. ⬛ BLACK ANODISED FINISH: The black anodised surface is bonded to the aluminium, harder wearing than paint and corrosion resistant. It gives a uniform look on black speakers, racks and stands. 🔧 M8 THREAD: Screws directly into inserts and tapped holes with an M8 internal thread. The mating part should have at least 10 mm of thread depth so the spike can be fully screwed in. It will not fit M6, M10 or imperial threads, so please check before ordering. Aluminium threads are softer than steel, so tighten by hand only. 🔺 20 MM CONE: The long cone gives extra ground clearance under the equipment and a defined contact point with the floor or a pad. ⚠️ FLOOR CARE: The point can mark or damage soft and delicate floors and furniture. Use a pad or cup under the spikes if needed (not included) and test in an inconspicuous spot first. 🎵 APPLICATIONS: For HiFi speakers, subwoofers, racks and stands that have M8 threaded inserts. Screw all four spikes in evenly and check that the equipment stands level and stable after fitting. 🇪🇺 PRECISIONGEEK MADE IN THE EU: Designed and manufactured in Europe on our own CNC machines. Dimensional accuracy and thread quality are checked before dispatch. A brand specialising in precision turned and milled parts in aluminium, stainless steel and brass.