PROZOR DAC Converter 192kHz Digital to Analog Optical Toslink Coaxial RCA L/R 3.5mm Stereo Audio Adapter with 1 m/3 ft Cable for HDTV DVD PS3/4

【Turn a Digital-Only TV Back Into an Analogue One】 If your new TV only has an optical (Toslink) or coaxial digital audio output, this DAC converter turns that digital signal into analogue RCA L/R and 3.5mm audio, so you can keep using your existing hi-fi amplifier, active speakers or wired headphones instead of replacing them. It also works with DVD and Blu-ray players, TV boxes, set-top boxes and games consoles that have an optical or coaxial output 【Set the Source to PCM First - PCM 2.0 Stereo Only】 This converter only accepts PCM (2.0 channel) stereo and does not decode 5.1 surround formats, so set the digital audio output on your TV or player to PCM before use. Reference paths: Settings > Sound > Expert Settings > Audio Format > PCM, or Menu > All Settings > Sound Out > Optical > Digital Sound Out > PCM. If you get no sound or distortion, check this setting first 【192kHz 24-bit Conversion With 105dB SNR】 Supports 32-192kHz at 16-24 bit, with 105dB signal-to-noise ratio, 94dB channel separation and 20Hz-20kHz response for clear dialogue and music. For TV use the 105dB SNR and shielding matter more than the 192kHz figure. Housed in an aluminium case with gold-plated connectors to aid shielding and keep the signal path clean 【Fixed Line-Level Output - No Volume Dial on the Unit】 There is no volume control on the converter itself: it sends a fixed line-level output designed for an amplifier or powered (active) speakers - not passive speakers directly. Output impedance is 10 ohms and headphone output is 0-250mW, so if the level sounds low when driving headphones or passive speakers, connect it to a headphone amplifier or a powered amplifier first and adjust the volume there 【Optical Cable and USB Power Cable Both Included】 In the box you get the 192kHz DAC converter, a 1m optical cable, a USB power cable and a user manual. The unit runs on 5V USB power via the included cable - plug it into a spare USB port (such as your TV's) or a standard DC 5V/1A charging plug. Note: no charging plug is included. You will need your own RCA cables to connect it to your amplifier or active speakers (not included). At 85g it is light and compact enough to tuck away behind the TV