Prozwee Tire Valve Stem Core Quick Replacement Tool Kit, Remover Installer with 12 Stems and 10 Cores Perfect for Changing Cars, Trucks, Motorcycles, etc

ESSENTIAL SUPER TOOL - Super simple and fast valve change tool. If you can't remove your tires for fixing or repairing, this tool set is convenient. The core remover installer tool also allows you to quickly remove and install tire valves and pull out the valve stem with leverage. This set is suitable for cars, light trucks, small trailers, unicycles, lawn mowers and ATVs. And motorcycles 【Convenient Tool Kit】Each tool in the kit is fully functional. The T-hook quickly pulls out the damaged valve stem, while the taper positioning tube provides positioning when installing the new valve stem, pushrods push the new valve stem into the valve hole and hold it in place 【201 STAINLESS STEEL】All the metal parts in the kit are made of 201 stainless steel, which can hold securely in the workshop filled with wet oil, resistant to rust and corrosion. However, there is no doubt that all tools need to be maintained carefully 【UNIVERSAL BUT NOTE】This kit is only for .453 valve stem and will not work with 5/8" valve stem and will not work with tires equipped with tire pressure monitoring system (TPMS). The kit comes with 4 TR413 valve stems, so you don't need to buy the stem again if needed How to Use: 1. Remove the tire first, then insert the T-hook in the gap between the hub and the valve. 2. After inserting the T-hook, rotate the T-hook to hook it on the valve and pull it outward. 3-Screw the new valve into the push rod. Lubricates the bottom of the new valve. 4- Align the positioning tube with the valve hole, push rod through the positioning tube completely. 5-Pull the push rod outward until the valve is installed and remove the screws