Puig Turn Lights Plate Supports

Puig 9655n Turn Signal Support. Upgrade your motorcycle´s look and lighting with Puig´s Chip LED Turn Signals. These sleek, black turn signals feature transparent glass (27x18mm) and are fully homologated. They are designed as a direct replacement for your existing turn signals. Please note that switching to LED turn signals may affect your motorcycle´s flashing frequency. If your bike uses a bimetallic relay, you may need to install Puig´s resistors (Ref. 42980 for 4 signals, Ref. 58730 for 2) or replace the flasher relay with a Puig electronic version to ensure proper operation. Consult your motorcycle´s specifications if you´re unsure about the relay type. Chip Turn Signals Replace your motorcycle´s turn signals with Puig´s Chip turn signals.Homologated product with LED bulbs with transparent glass (27x18mm) and black color.Turn signal function. Technical Information Keep in mind that most motorcycles use bimetallic relays, therefore their frequency depends directly on the amperage that circulates through the circuit.When replacing them, this amperage varies, and therefore the flashing frequency also. In the case of using electronic relays, whose frequency does not depend on the amperage, it should not affect the flashing. In case we have doubts about the relay that our motorcycle mounts, it is recommended to mount the turn signal and check said frequency. The turn signal bulb should also be taken into account, in case the power of the bulb varies, we must replace it with one of identical power and they can be found in our catalog. If our choice is to use an LED bulb, there are two options to balance the flashing frequency: A resistor must be incorporated in parallel in the circuit on the right side and another on the left side.In case of replacing the 4 turn signals, the Ref. resistor must be used.42980, but if only two are replaced, the Ref. resistor must be used.58730.Identify the motorcycle´s flasher relay (location and number of pins) and replace it with the corresponding one from the list offered by Puig. There are some motorcycles on the market that do not have a specific flasher relay, which makes its replacement impossible.It should also be taken into account that if more than one relay is involved in the flashing action, replacing only one will not solve the problem.Reference.PG-9655N UNICO.50032. tradeinn Motardinn

The Puig cover of the support for the aftermarket turn signals is the essential complement for a perfect finish of the universal turn signals for motorcycles