QWORK® Resin Bubble Remover 95kPa Vacuum Chamber for Silicone Removal in 10 Minutes Capacity up to 2000ml Low Noise

1. Fast Resin Degassing - This vacuum chamber reaches up to 95 kPa vacuum for effective bubble removal in epoxy resin. Suitable for resin projects up to 2000 ml capacity, helping reduce trapped air in around 10 minutes depending on resin type, temperature and viscosity. 2. Important: Prevent Resin from Entering the Air Vent - Do not overfill the container. Always leave enough headspace because resin may rise and foam during vacuuming. If resin enters the air vent or exhaust tube, the machine may be permanently damaged. For best results, place resin in a suitable mixing cup inside the chamber rather than filling near the top. 3. Use Only the Original Power Adapter - Please use only the supplied original power adapter. Do not use phone chargers or other low-power adapters, as insufficient power may affect operation and pressure release performance. 4. Correct Operation for Safe Pressure Release - After the vacuum cycle is finished, press and hold the release button until pressure is fully equalised before opening the lid. If the lid does not open immediately, wait a few minutes and do not force it open. 5. For Standard Epoxy Resin Only - Designed for standard epoxy resin with sufficient working time. Not suitable for UV resin or fast-curing 2-part resin systems with short pot life. Ideal for resin art, mould making, jewellery making and other DIY epoxy projects., Weight: 2.18478101642 Pounds, Manufacturer: QWORK