Renthal MTB-Vorbau Apex

Renthal Apex 35 Mm Stem. Experience the perfect blend of All Mountain strength, Enduro stiffness, and XC lightweight with the Renthal Apex 35 stem. Fully CNC machined from high-grade aluminum, its unique 240-degree, zero-gap clamps provide superior support for wide bars while shedding unnecessary weight. The design features an oversize center bore and external webbing to maximize stiffness and structural integrity. Flip the stem for a +/- 6-degree rise to dial in your perfect bar height. A premium, durable finish makes it look as good as it performs. Experience exceptional performance and quality with this premium aluminum bike stem. Its robust, lightweight construction offers reliability and a fantastic feel for any ride. Enjoy impeccable craftsmanship, a sleek design that looks amazing on your bike, and precise adjustment for handlebars. A truly top-tier mountain bike stem, perfect for all-mountain and fat bikes, it´s a worthwhile investment for its durability and flawless function. The Renthal Apex 35 combines All Mountain strength, Enduro stiffness and XC lightweight. Unique 240 deg handlebar clamps allow much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars. The Apex 35 is fully CNC machined, featuring an oversize centre bore, extensive machining and external webbing to maximise structural strength and stiffness and minimise weight. CNC Machined: The Renthal Apex 35 is CNC machined from a solid billet of 2014 aluminium with 7075 aluminium clamps. These materials were specifically chosen for this application, to give the highest strength to weight ratio. Zero Gap: The Apex 35 handlebar clamping system features a zero-gap at the underside of the handlebar. This gives superior support for the handlebar and ensures accurate bolt torque. Oversize Centre Bore: The unique handlebar clamping system opens up the front of the stem, allowing an oversize centre bore, to increase stiffness and strength. 240 degree clamps: The clamps are inserted over the small diameter section of the handlebar and slid into the centre, giving a 240 degree wrap of the handlebar. +/- 6 Degree Angle: The stem body can be flipped to give either a plus 6 degree or minus 6 degree rise. This allows the correct bar height to be achieved with any wheel size or head tube length. High Quality Finish: After CNC machining, the stem components are anodised and laser marked to give a very high quality and durable finish.Specifications:- Rise: +/- 6°.- Clamp width: 46 mm.- Stack Height: 40 mm.- Clamp diameter: 35 mm.- Steerer Clamp Diameter: 28.6 mm.- Weight: 112 g. tradeinn Bikeinn

HANDLEBAR CLAMP: The clamps are installed over the small diameter section of the handlebar and slid into the centre, giving a 240° wrap of the handlebar. The zero-gap lower clamp ensures maximum support of the handlebar, in this critical zone. CNC machined V2 Apex steerer clamp is side mounted which give a clean rear profile to the stem and removes any sharp edges. The angled steerer clamp screws, tangential to the steerer tube, give much more efficient clamping, for a higher clamping load The V2 Apex stem is manufactured from forging and then CNC machined. All unnecessary material is removed to minimise weight, whilst retaining maximum strength and stiffness. The unique handlebar clamping system opens up the front of the stem, allowing intricate machining of the stem body internals, to increase stiffness and strength and reduce weight The Renthal V2 Apex is forged and CNC machined from 2014 aluminium with 7050 aluminium clamps. These materials and their heat treatment processes have been specifically chosen for this application, to give the highest strength and durability