Replacement for Logik Tumble Dryer NTC Probe LCD7W18 LCD8W18 LHP8W18 temperature sensor helps correct erratic heat. 5701020122, 5701021271 and 5701021635.

Restore Reliable Heat Sensing - This NTC probe measures drying temperature. Replacement for Logik LCD7W18, LCD8W18, LHP8W18, 5701020122, 5701021271 and 5701021635 tumble dryers. Keep Heat Readings Consistent - The thermistor responds to changes in dryer temperature and supplies feedback to the controls. Isolate the mains supply first; a competent person must fit it in accordance with current UK wiring regulations. Support Correct Drying - The new probe gives the control system a temperature reading as the load dries, replacing the sensor already in the machine when that part has failed. Restore Temperature Feedback - This NTC sensor changes resistance as it warms, allowing the dryer controls to monitor heat through a cycle. A competent person should diagnose the fault before replacing the existing probe. Check Your Model Is Listed - Replacement for Logik LCD7W18, LCD8W18, LHP8W18, 5701020122, 5701021271 and 5701021635 tumble dryers. The model number is on the rating label inside the door opening.