Ridgid 17881 258 Cutter with No.700 Powerdrive 115 Volt RID17881

General description The RIDGID 258 Power Pipe Cutter is designed for cutting 2 1⁄2 - 8in (65-200mm) schedule 10/40 steel pipe, galvanized pipe, and rigid conduit, making it ideal for both job site and shop use. Powered by the RIDGID No. 700 Power Drive, this displacement cutter ensures square cuts with minimal burrs. Technical specifications No Load Speed: 26-30/min Capacity: Schedule 10/40 Steel Pipe: 2 1⁄2 - 8in (65-200mm) Weight: 48kg Usage The operator can control the feeding rate by using the hydraulic foot pump during operation, allowing for quick and efficient cutting without producing abrasive dust, sparks, or open flames. For additional functionality, the RIDGID Pipe Roller can be utilized to rotate the pipe while a second operator uses a grinder to bevel the pipe.

The RIDGID 258 Power Pipe Cutter cuts 2 1⁄2 - 8in (65-200mm) schedule 10*/40 steel pipe galvanized pipe rigid conduit etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21ft (6m) or nipple lengths of pipe is achieved quickly without abrasive dust sparks or open flame. Also the RIDGID Pipe Roller for bevelling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe. No Load Speed: 26-30/min. Capacity: Schedule 10/40 Steel Pipe: 2.1⁄2 - 8in (65-200mm). Weight: 48kg.  PTDRID17881