Ronseal Diamond Hard Floor Varnish Satin 5 Litre

Ronseal Diamond Hard Floor Varnish provides durable protection for wooden floors while preserving the natural beauty of the timber. This water-based satin finish is designed for areas with heavy foot traffic, offering resistance to scuffs, knocks and spills. It dries to the touch in about 30 minutes, enabling quicker re-use of the floor, and its diamond-hard protection helps maintain a long-lasting, non-yellowing finish that reveals the grain of the wood. Suitable for both unvarnished and previously varnished floors, it covers up to 18 m² per litre and is formulated with low VOC and low odour properties to minimize lingering smells. The product is applied with a brush and requires three coats for best results, with a two-hour re-coat time."

Features

• Diamond-hard protection against scuffs and knocks
• Non-yellowing satin finish enhances wood grain
• Dries to touch in 30 minutes; 2-hour re-coat
• Covers up to 18 m² per litre
• Low VOC and low odour; water-based

Technical specifications

• Finish: Satin
• Size: 5 litre
• Coverage: 18 m² per litre
• Drying time: 30 minutes (touch dry)
• Re-coat: 2 hours
• Number of coats: 3
• Application: Brush

Ensure the room temperature is above 10 degrees Celsius. Remove furniture and open doors and windows for ventilation. For unvarnished floors, sand along the length of the floorboards with 120 grit sandpaper. For previously varnished floors, lightly sand with 120 grit sandpaper and remove any flaking varnish.