Ronseal Interior Varnish Quick Dry Satin Ebony 750ml

The Ronseal Interior Varnish Quick Dry Satin in Ebony (750ml) is a quick-drying interior varnish with Diamond Hard protection. It provides enhanced durability against heat, scratches and water, delivering a fade-resistant satin finish on wood surfaces. The varnish dries to touch in about 20 minutes and can be recoated after roughly 2 hours. It is suitable for bare or previously varnished interior wood surfaces and is available in Satin, Gloss and Matt finishes. Preparation involves cleaning the surface, sanding smooth, removing dust, then stirring the varnish well before application. Apply evenly in the direction of the wood grain using a brush or roller, allowing adequate drying between coats.

Features

• Diamond Hard coating for superior durability
• Quick-drying: touch dry in 20 minutes
• Fade-resistant satin finish for interior wood
• Low odour
• Suitable for bare or previously varnished wood
• Available in Satin, Gloss and Matt finishes

Technical specifications

• Volume: 750 ml
• Finish: Satin (Ebony)
• Drying time: touch dry 20 minutes; recoat after 2 hours
• Protection: Diamond Hard coating
• Interior use only
• Compatibility: bare or previously varnished wood surfaces

Usage

1. Prepare the surface by wiping with a cloth and white spirit to remove grease and dirt.
2. Sand with 120 grit sandpaper to smooth patches and remove old coatings.
3. Clean off dust with a damp cloth and allow to dry thoroughly.
4. Stir the varnish well before use.
5. Apply an even coat in the direction of the wood grain using a brush or roller.
6. Allow 1 hour to dry before applying another coat.