Ronseal OCDSW500 500 ml One Coat Damp Seal White
Featured
|
£ 18.52 |
To Shop
|
|
£ 19.10 |
To Shop
|
|
£ 21.69 |
To Shop
|
Description
The Ronseal One Coat Damp Seal is specifically designed to permanently block damp stains on walls and ceilings, making it an essential solution for combating damp issues in your home. This versatile product can even be applied on damp surfaces, allowing trapped moisture to escape without causing further damage to your interiors. Once dry, the treated areas are ready for painting or wallpapering, ensuring a seamless finish to your renovation project.
Preparation Before Application
Before you start, it is crucial to address the source of the dampness. Ensure that the reason for the damp has been properly fixed to prevent future issues. For optimal results, open doors and windows for adequate ventilation and lay down dust sheets to protect your belongings from splashes or drips.
To prepare the surface for treatment, remove any existing wallpaper using a scraper and sand away any loose or flaking paint. The area to be painted should be clean; if mould is present, it is recommended to eliminate it prior to applying the damp seal using Ronseal’s 3-in-1 Mould Killer. While this product allows you to paint over damp surfaces, make sure they are not dripping wet.
Application Process
When you are ready to apply the Ronseal One Coat Damp Seal, start by giving the product a thorough stir to ensure an even consistency. You can then use a roller or brush for application. If your focus is on a smaller damp patch, remember to extend the treatment area at least 30cm around the spot to ensure complete coverage.
The product is designed for convenience, becoming touch dry in just 2 hours, and it will be ready for you to paint or wallpaper over after 4 hours of drying time. For areas that are particularly prone to mould, consider finishing the job with Ronseal’s 6 Year Anti-Mould Paint for added protection against future damp problems.
Usage and Coverage
The Ronseal One Coat Damp Seal is suitable for all indoor walls and ceilings, and can be applied to both bare and previously painted surfaces. For an efficient clean-up after use, simply wash your brushes and rollers in warm, soapy water. The coverage of this product is impressive, providing up to 5 square metres per litre, allowing you to tackle larger areas with ease.
With the Ronseal One Coat Damp Seal, you are equipped with a reliable solution that not only addresses existing damp stains but also helps prevent future occurrences, ensuring a long-lasting clean and attractive finish to your indoor spaces.
Description
The Ronseal One Coat Damp Seal is specifically designed to permanently block damp stains on walls and ceilings, making it an essential solution for combating damp issues in your home. This versatile product can even be applied on damp surfaces, allowing trapped moisture to escape without causing further damage to your interiors. Once dry, the treated areas are ready for painting or wallpapering, ensuring a seamless finish to your renovation project.
Preparation Before Application
Before you start, it is crucial to address the source of the dampness. Ensure that the reason for the damp has been properly fixed to prevent future issues. For optimal results, open doors and windows for adequate ventilation and lay down dust sheets to protect your belongings from splashes or drips.
To prepare the surface for treatment, remove any existing wallpaper using a scraper and sand away any loose or flaking paint. The area to be painted should be clean; if mould is present, it is recommended to eliminate it prior to applying the damp seal using Ronseal’s 3-in-1 Mould Killer. While this product allows you to paint over damp surfaces, make sure they are not dripping wet.
Application Process
When you are ready to apply the Ronseal One Coat Damp Seal, start by giving the product a thorough stir to ensure an even consistency. You can then use a roller or brush for application. If your focus is on a smaller damp patch, remember to extend the treatment area at least 30cm around the spot to ensure complete coverage.
The product is designed for convenience, becoming touch dry in just 2 hours, and it will be ready for you to paint or wallpaper over after 4 hours of drying time. For areas that are particularly prone to mould, consider finishing the job with Ronseal’s 6 Year Anti-Mould Paint for added protection against future damp problems.
Usage and Coverage
The Ronseal One Coat Damp Seal is suitable for all indoor walls and ceilings, and can be applied to both bare and previously painted surfaces. For an efficient clean-up after use, simply wash your brushes and rollers in warm, soapy water. The coverage of this product is impressive, providing up to 5 square metres per litre, allowing you to tackle larger areas with ease.
With the Ronseal One Coat Damp Seal, you are equipped with a reliable solution that not only addresses existing damp stains but also helps prevent future occurrences, ensuring a long-lasting clean and attractive finish to your indoor spaces.
Product specifications
Price History
Prices were last updated on:
Related products
