Ronseal One Coat Tile Paint White Satin 750ml RSLOCTPWS750

Ronseal One Coat Tile Paint rejuvenates old tiled surfaces without re-tiling, making it suitable for kitchens and bathrooms. This water-based paint provides a satin white finish and is designed to resist moisture and mould. It is suitable for bare or previously painted tiles and does not require a primer. The product is intended for interior tile surfaces (not floor tiles or tiled worktops) and comes in a 750ml size with a coverage rate of about 8m² per litre. Application is simple: stir well, use a synthetic brush, and apply in a up-and-down motion on each tile. Drying times are modest, with touch dry in about an hour and recoat possible after around four hours. The paint is low in VOC and aimed at transforming tile surfaces with a single coat; a second coat may be needed for highly porous substrates.

Features

• Water-based paint for kitchen and bathroom tiles
• One coat covers most tiles
• Satin white finish, 750ml
• Waterproof and mould resistant
• No primer required
• Suitable for bare or previously painted tiles

Usage

1. Ensure room temperature is above 10°C and ventilate the area.
2. Thoroughly clean tiles to remove dust, dirt, grease, and fix any damaged areas; clean grout as needed.
3. Stir the paint well before application; apply with a synthetic brush in a vertical then horizontal motion on each tile.
4. Allow to dry: touch dry in 1 hour and overcoat time of 4 hours if required; a second coat may be needed for extremely porous substrates.