RP2350 Matrix Microcontroller Dev Board, Onboard 8 x RGB LED for Colorful Lighting Display, 6 axis IMU Tilt Angle and Speed Measurement, Dout Pin Extending Matrix, etc.

RP2350-Matrix development board Based on Raspberry Pi RP2350, dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz. Built-in 520KB of S-RAM and 16MB of onboard Flash memory Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope). Onboard 8 × 8 RGB LED matrix for colorful lighting display. Adapting Dout pin for extending RGB matrix. Type-C port, easier to use Adapting 25 × multi-function GPIO pins. 1 × HSTX, 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC and 16 × controllable PWM channels. 12 × Programmable I/O (PIO) state machines for custom peripheral support USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip Support C/C++, MicroPython, Arduino IDE. Online Development Resources and Technical Support are provided, please feel free to contact us if you need!