RP2350 PiZero Microcontroller Development Board Based on Raspberry Pi RP2350, Onboard DVI Interface, TF Card Slot and PIO USB Port, Compatible with 40PIN GPIO Header, 16MB Flash

RP2350-PiZero development board based on Raspberry Pi RP2350 dual-core & dual-architecture microcontroller: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz 520KB of S-R-A-M, and 16MB of onboard Flash memory, with reserved solder pads for PSRAM chip expansion. Onboard TF card slot for reading and writing TF card. Type-C connector for easier use Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or device via onboard PIO-USB port. Onboard bat-tery recharge/discharge header, suitable for mobile scenarios Adapting 5 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 16 × controllable PWM channels. 12 × Programmable I/O (PIO) state machines for custom peripheral support USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip